aero-naut Marina Kullanıcı Kılavuzu - Sayfa 16

Oyuncak aero-naut Marina için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. aero-naut Marina 20 sayfaları.

44a

Locate windscreen frame 67 in set of photo etched parts and carefully fold along etched lines. Fold down the tabs on

the frame and ﬁt into slots in deck. Do not glue!

Remove windscreen frame from deck and glue panes 76 in place. Then glue frame tabs into slots in deck.

44b

Install servo in servo tray 60 and install connectors 71 to servo

arm.

Make a Z-bend at one end of each control linkage and attach

linkage to outboard motor.

Drill holes through part 27 for control linkage, insert linkage

from the rear into hull and into connectors on servo arm.

Mount outboard motor on transom.

Attention: Make sure control linkage moves freely and

unobstructed with movement of servo arm!