aero-naut Princess Talimatlar Kılavuzu - Sayfa 9
Oyuncak aero-naut Princess için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. aero-naut Princess 17 sayfaları. 3081/00
Sayfayı Yazdır
31
30
24
22
8
33
34
32
34
Glue the keel wedge 31 between the hull bottom 24 and the shaft
24
tube 30. Ensure that the propeller is still free to rotate.
22
23
36
4
5
36
6
7
Glue the deck support rails 22 in the notches
25
in the top of frames 1 - 11, and secure them
with screw-clamps: press the rails 22
outwards as far as they will go, i.e. towards
the hull sides 23.
26
Glue the cockpit support rails 36 in
the notches in frames 4 - 8; the rails
must be pressed fully into the
notches in the frames. Glue the
transom 25 to the outside of frame 1.
35
35
Glue the rails 34 in the deck surround 32 at
27
the front, followed by the main deck 33.
Glue the fabric tape over parts 32, 33 and
34 to bridge the joints. Turn the prepared
deck over.
28
Sand back the top of frames 1 - 11, the
hull rails 17 and the rest of the upper
hull components so that all these parts
23
are the same height as the hull side
panels 23. The deck 32 can now be
glued to the hull, securing it with spring-
clamps and strips of adhesive tape as
shown.
25