Acer AL2017ABMD Kullanıcı Kılavuzu - Sayfa 4

Monitör Acer AL2017ABMD için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Acer AL2017ABMD 11 sayfaları. Acer computer monitor user's guide

Installation instructions

Note: Read the Safety section carefully before starting the installation.

When installing your LCD monitor, consider the placement of the monitor:

To minimize the reflection of the monitor, protect your eyes, and ensure premium

quality, don't install your LCD monitor near windows or where there is backlight. Keep

the monitor at least 30 cm away from your eyes.

The upper edge of the monitor should be just a little higher than your line of sight.

Adjust the front and back dip angles of the monitor, so that you can view the display

comfortably.

Connecting the base to the monitor

Take the base out of the box and place it on a flat table.

Position the monitor on top of the base.

Connect the base into the neck of the monitor

along the track.

You will hear a click sound when the base and the

monitor are properly connected.

Connecting the LCD monitor to a PC

Make sure that the power supply of your PC is

turned off and the power plug is removed.

Connect and fasten both ends of the signal cable to

your PC host and LCD monitor, respectively.

If your LCD monitor has built-in speakers, connect

the audio cable attached to the monitor from the

sound card output of your PC to the audio input on

the back of your LCD monitor.

Connect the attached power cable to your LCD

monitor.

Plug the power cable into the receptacle.

Use the cable tie to bind up the power cord and the

D-sub signal cable / DVI-D cable.

Turn on the power supplies of your PC and LCD

monitor.

Power cable

Audio cable

DVI signal cable (optional)

D-Sub signal cable