Aktakom ASE-1115 Kullanıcı Kılavuzu - Sayfa 5

Lehimleme Tabancası Aktakom ASE-1115 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aktakom ASE-1115 8 sayfaları.

4. Safety Instruction

• The manufacturer assumes no liability for uses other than

those described in the operating instructions or for

unauthorized alterations.

• The operating instructions and cautions should be read

carefully and kept in an easily visible location in the vicinity

of the control system. Non-observance of the cautions will

result in accidents, injury or risks to health.

5. Caution!

5.1 The power cord only can be inserted in approved power

sockets or adapters.

5.2 High Temperature

The temperature of the soldering tip will reach as high as

around 400℃ (752℉) when the power switch is on. Since

mishandling may lead to burn and fire, be sure to comply with

the following precautions:

• Do not touch metallic parts near the soldering tip/ nozzle.

• Do not use this system near the flammable items.

• Advise other people in the work area that the unit can

reach a very high temperature and should be considered

potentially dangerous.

• Turn off the power switch while taking breaks and when

finishing using.

• Before replacing parts or storing the system, turn off the

power and let it cool down to the room temperature.

• Warning: this tool must be placed on its stand when not

in use.

• A fire may result if the appliance is not used with care,

therefore: