Aktakom ATE-2532 Kullanıcı Kılavuzu - Sayfa 2
Termometre Aktakom ATE-2532 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aktakom ATE-2532 4 sayfaları.
Sayfayı YazdırNOTE: This manual is for three models, which are distinguished by ATE-2530, ATE-2532 and ATE-2533 hereinafter.
1. SAfETy INfOrMATION
Please read the following information carefully before using the meter.
Safety symbols:
Danger/Important Information prompt.
Comply with CE safety standards.
This instrument is compatible with the following standards:
EN61326-1
EN61010-1
EN60825-1
Warning! Do not point laser directly at eye or indirectly off reflective surfaces.
2. PrEcAUTIONS
• After abrupt ambient temperature changes, allow instrument temperature to stabilize for 30 minutes before using
for measurement.
• Avoid operating near strong electromagnetic fields such as arc welders, induction furnaces, etc.
• Do not expose thermometer to excessive ambient temperatures.
• Keep the thermometer clean and avoid getting dust into the detector's optics.
• Do not use solvents to clean the meter.
3. fEATUrE LOcATIONS
1. Sighting Groove
2. Laser orifice
3. Detector orifice
4. Tripod nut
5. Trigger
6. Battery cover
7. LCD
8. Laser button
9. Emissivity reduction button (ATE-2532)
Temperature reduction button (ATE-2533)
10. Mode button
11. Emissivity addition button (ATE-2532)
Temperature addition button (ATE-2533)
12. Backlight button
13. °C/°F button
4. LcD ILLUSTrATION
ATE-2530:
1. Laser-On Indicator
2. Holding indicator
3. The first temperature display
4. Low power indicator
5. Average value indicator
6. MAX/MIN indicator
7. The second temperature display
8. °F temperature unit
9. °C temperature unit
10. Emissivity display
11. Measurement indicator
ATE-2532: (Emissivity adjustable)
1. Laser-On Indicator
2. The first temperature display
3. Average value indicator
4. MAX/MIN indicator
5. Emissivity display
6. The second temperature display
2
ATE-2530
ATE-2532
Emissivity adjustable
www.tmatlantic.com
ATE-2533
Temperature Alarming