Aktakom ATE-2566 Kullanıcı Kılavuzu - Sayfa 2

Termometre Aktakom ATE-2566 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aktakom ATE-2566 6 sayfaları.

Features:

 Rapid detection function

 Precise non-contact measurements

 User selectable ºC or ºF

 Dual laser sighting

 Automatic Data Hold

 Trigger lock

 Emissivity Digitally adjustable from 0.10 to 1.0

 MAX/MIN temperature displays

 Automatic selection range and Display Resolution 0.1ºC(0.1ºF)

 Automatic Data Hold & Auto power off

 Set high and low alarms

 The meter at 10 inches away measure 1 inch target

 Backlight LCD display

Wide range application:

Food preparation, Safety and Fire inspectors, Plastic molding, Asphalt, Marine and screen printing, measure ink and

dryer temperature, Diesel and Fleet maintenance.

Field of View

The meter's field of view is 10:1, meaning that if the meter is 10 inches from the target, the diameter of the object under

test must be at least 1 inch. Other distances are shown below in the field of view diagram. Refer to the chart printed on

the meter for more information.

D:S= 10:1

1. SAFETY

 Use extreme caution when the laser beam is turned on.

 Do not let the beam enter your eye, another person's eye or the eye of

an animal.

 Be careful no to let the beam on a reflective surface strike your eye.

 Do not allow the laser light beam impinge on any gas which can

explode.

12. 5mm @ 125mm

25mm @

0.5in @ 5.0in.

1in @10in.

www.tmatlantic.com

250mm