COASTLINE 318 Montaj Talimatları - Sayfa 2
İç Mekan Mobilyaları COASTLINE 318 için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. COASTLINE 318 2 sayfaları. Cafe fusion dining chair
Sayfayı Yazdır2
ATTACH APRONS TO SIDE
ASSEMBLIES
Attach front and rear
aprons to Side As-
semblies as shown,
with the pockets of
the
down using (4) 80mm
Hex
counter-bored
in Legs.
5
SECURE APRONS TO LEGS
7
PLUG ALL HOLES WITH PROVIDED 5/8" AND 3/8" taps™
3
ATTACH BACK SLATS TO
REAR LEGS
aprons
facing
Lags
through
holes
At this time make sure
lags from step 2 are tight.
Rotate rear apron to align
with angle on seat sup-
port, and make sure front
apron is parallel with front
leg. Secure aprons with 1-
3/4" Philips head screws
through the pockets on
underside of aprons into
legs.
4
Tap 5/16" dowels into
large holes in back
slats. Align with large
holes in rear legs.
Secure
with
1-3/4"
Phillips head screws
through 3/8" counter-
bore in Rear Legs
into pilot holes in
back slats.
6
ATTACH FOOTREST AND LOWER REAR
STRETCHER (316 ONLY)
SEAT TO SIDE ASSEMBLIES
Align seat assem-
bly
with
Secure using 1-
3/4" Philips head
screws
countersink holes
on inside of seat
assembly into pi-
lot holes in side
assemblies.
Attach
Foot
Rest
Rear Stretcher as shown,
with pockets of Stretchers
facing down, using (4)
80mm Hex Lags through
counter-bored
holes
Legs. Align straight, then
secure using (4) 1-3/4"
screws through
on underside of Foot Rest
and Rear Stretcher.
frame.
through
and
in
pockets
Page 2
REV A