Aktiv X4 Manuel - Sayfa 12

Tekerlekli Sandalye Aktiv X4 için çevrimiçi göz atın veya pdf Manuel indirin. Aktiv X4 16 sayfaları. X series

6.4 TROUBLESHOOTING

Your Aktiv Wheelchair is supplied with factory settings and configurations as standard. Sometimes your wheelchair

may need to be adapted to suit your needs better. Constant use requires rigid maintenance, especially if the

wheelchair has been altered. The following troubleshooting guide lists several common problems with that may

occur, and offers corrective actions for each. We recommend the use of only genuine Aktiv Wheelchair replacement

parts. Please contact your dealer for a list of spare parts for your wheelchair.

SYMPTOM

If you have a problem that cannot be solved in the troubleshooting

table, we recommend that you contact your dealer, or Aktiv Wheelchairs.

6.5 REPAIRS

Only those parts that are removable (without tools) are suitable for replacement and fitment by the user. The

repair of these parts must be carried out by an authorised service agent. These parts include, but are not limited to;

Foot/leg rest assemblies, Armrest assemblies, Push handles and hand grips, Quick release rear wheels.

Maintenance checks mentioned in table 6.1 are suitable to be carried out by the user. Any repairs required

therefore must be carried out by and authorised service agent. In the event that the wheelchair is loose, unstable

or has signs of fatigue such as cracks, tears or splitting please return the entire wheelchair to an authorised service

agent for immediate attention and repair. To return the entire wheelchair for repair, ensure footrests and cushions

are removed and packaged separately.

Fold wheelchair and pack securely into a large carton. Return address details must be shown clearly on the

packaging. Replacement parts are readily available, and can be ordered in by your authorised service agent from

the manufacturer. Find an authorised service in your area by contacting: Aktiv Wheelchairs

Mobility, Comfort and Style.

POSSIBLE CAUSE AND CORRECT SOLUTION

Tyre pressure may be incorrect or unbalanced. Insure

that pressur e is correct and equal in both wheels

Nuts and/or bolts may be loose. If so, tighten. Bolts

should be snug.

Rear wheels and/or casters may be adjusted

improperly. Insure that both rear wheels are mount e d

in ident ical positions, and that casters are mounted in

ident ical positions.

Bearings could be worn.

Caster stem(s) may be adjusted improperly. Correct

adjustment