AeroAudio BTI Manuel - Sayfa 2

Alıcı-Verici AeroAudio BTI için çevrimiçi göz atın veya pdf Manuel indirin. AeroAudio BTI 6 sayfaları. Bluetooth transciever

BLUETOOTH TRANSCIEVER

MANUAL

The AeroAudio BT1 is a Bluetooth receiver and transmitter for connecting

Bluetooth devices to a studio. Not only can music be played from a phone, but

also the phone can be used as a telephone fork and thus directly via whatsapp,

skype, telephony or other communication apps a conversation in the broadcast.

The caller hears the return signal from the studio.

Switching on

When the BT1 is switched on, the LED in the connect button will blink fast.

This indicates the BT1 will start. After starting, the led in the connect button

will blink once per 3 seconds. This indicates the BT1 is ready to connect, the

BT1 is now in stand-by mode.

Making a connection

Push the connect button for 1 second to make a new connection. The LED will

blink once per second.

The BT1 is now visible for other Bluetooth devices under the name AeroAudio

BT1. When the bluetooth connection is established, the LED will light up

continuously.

As long as the LED is on continuously, it is possible to play audio files or record

telephone calls.

In case of an incoming phone call, the BT1 will automatically answer the call.

Disconnecting

Press the connect button for 1 second. The BT1 will disconnect the existing

Bluetooth connection. The LED will blink once per second again, ready to

establish a new connection.

Making the module invisible

To make the module invisible to other devices, press the connect button for 1

second after disconnecting it. The LED will now blink once every 3 seconds. The

module is no longer visible and pairing is not possible. This avoids confusion

about which BT module to connect to when using multiple BT modules.

STEENWEG 148C - 9810 NAZARETH - BELGIUM - T +32 (0)9 396 76 40 - [email protected]