Aktobis WDH-AP1101 Manuel - Sayfa 4

Hava Temizleyici Aktobis WDH-AP1101 için çevrimiçi göz atın veya pdf Manuel indirin. Aktobis WDH-AP1101 11 sayfaları.

Detailed view of fan speed

RC receiver

Fan speed adjustment button

Auto-Mode

1.) Preparation and installation of filters

The air purifier is factory equipped with all filters. First open the front filter screen by reaching into the side

ventilation slots at the upper end and pulling the filter screen forward with a slight jerk. Now remove all filters.

Remove the protective cover of the fine filters and then reinsert the filters into the unit in the correct order. When

inserting the filters, make sure that the filters are inserted correctly so that the tab with the inscription "Front" always

points forwards/outwards ! Finally, the prefilter is inserted. Make sure that all holders are properly seated in the

holding pockets. Finally the front panel is inserted again and closed.

See following diagrams / pictures:

Overview display & remote control:

Airsensor display

Instruction Manual:

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

www.AKTOBIS.de

ON / OFF button

Filter indicator

Filter change indicator

Light sensor

Night mode

Blue

= Very good

Green = Good

Purple

= Polluted

Red

= Not good

Auto-Mode

Filter button

(sensor adjustment)

Night mode

Fan speed

adjustment

button