Aktobis WDH-35B Manuel - Sayfa 2

Kurutucu Aktobis WDH-35B için çevrimiçi göz atın veya pdf Manuel indirin. Aktobis WDH-35B 8 sayfaları. Building dryer

Mounting the transport handle:

To reduce the volume, the transport handle of a new unit was mounted the wrong way round.

The following accessories are included for the transport handle assembly:

1 x transport handle

4 x long hexagon head screws



First loosen and remove the four hexagonal screws together with the washers with which the handle is

attached to the unit the wrong way round.



Now position the handle in the right direction so that it points diagonally backwards and the four fastening holes

of the handle are above the fastening holes on the unit casing. (See the cover picture of the operating

instructions).



Then screw in the four hexagonal screws to secure the handle to the unit. Make sure that the washers are

between the hexagon head screw and the handle. We recommend using a spanner or a suitable ratchet for

fastening.



Now your handle should be stable and firmly attached and nothing should stand in the way of safe transport.

Note: We also recommend checking whether the fastening screws of the feet are tightened or whether they have

loosened during transport. If this is the case, you can also tighten the screws with a spanner or a suitable ratchet.

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

www.AKTOBIS.de