Acer EA220Q Kullanıcı Kılavuzu - Sayfa 13

Monitör Acer EA220Q için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Acer EA220Q 23 sayfaları.

Installing monitor

1. Remove the monitor bracket and base from the packaging and place it on a stable and level

workspace.

The display support is aligned with the corresponding slot of the base, rmly installed on the base;

Align the rotating shaft above the support with the corresponding slot below the monitor and install

it rmly on the monitor.

3. Support wall hanging function, VESA100*100mm, M4*10 screws.

The monitor will be switched to "power saving" mode by the control signal from the display

controller, as indicated by the orange-colored power LED.

Power saving

The power saving mode will be kept until a control signal has been detected or the keyboard or

mouse is activated. The recovery time from "power saving" mode back to "on" is around 3 seconds.

To make installation easier, so long as your system supports the DDC protocol, the monitor is able

to plug-and-play. The DDC is a communication protocol through which the monitor automatically

informs the host system about its capabilities; for example, supported resolutions and corresponding

timing. The monitor supports the DDC2B standard.

(As shown below)

Model

LED light

Green

Orange