AIPTEK i1200 Kullanıcı Kılavuzu - Sayfa 15

Projektör AIPTEK i1200 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AIPTEK i1200 17 sayfaları.

User's Manual

Troubleshooting

If your projector does not seem to be functioning properly, check the items below before

you contact an authorized service center.

Symptom

Check if the HDMI is plugged correctly.

The projector does not

work when connecting

to a smartphone,

notebook or PC with

cable.

1. Enable your WLAN of PC or smartphone and select the

The projector can't be

access point labeled 'Projector-XXXXXXXX' to connect

detected when

running EZCast app.

with the projector.

2. Disconnect the Ethernet cable from your computer to

avoid affecting the wireless network connection.

1. Use the projector in a darker environment.

The projected image

is too dark.

2. Increase the brightness by using the power adapter.

3. Scale down the projectional image size.

1. Adjust the focus. Please refer to "Adjusting the Focus".

The projected image

is blurred.

2. Check if the lens is dirty.

The surface

Because of the high-luminance LED, it is normal that this

temperature of

projector generates heat in long-time use. It will not affect

projector is high.

the performance of the projector. Always keep the

ventilation slots free of dirt or obstructions and operate the

projector in a properly ventilated environment.

Recovering from

If the projector is running slow, freezing, crashing or locking

abnormal

up during the operation, you can try to insert a slim, pointy

object into the reset hole to trigger a hardware reset.

Check Point

Page 15