AIPTEK HyperPen 3000 Series Kullanıcı Kılavuzu - Sayfa 6
Grafik Tablet AIPTEK HyperPen 3000 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AIPTEK HyperPen 3000 Series 16 sayfaları. Pc tablet
Sayfayı YazdırPlease carefully read the following instructions to install HyperPen on
your computer.
1. Make sure your computer and all peripherals are turned off.
2. Remove the keyboard cable from the back of your computer.
3. Attach the keyboard cable into the female connector of the
keyboard/power adaptor cable and then plug the male connector of the
keyboard/power adaptor into the keyboard socket of your computer.
You may need to use the 5" to 6" keyboard connector if connector
sizes don't match up.
4. Plug the power jack of the keyboard/power adaptor cable into the
power socket of the RS-232 data/power connector.
5. Connect the RS-232 data/power connector to the serial port of your
computer. Use the 9 to 25 pin adaptor if necessary to fit your serial
port socket.
(5) To computer
Serial port
(3) To keyboard
(4) Power connection