American Sanders AVAC18 Operatör El Kitabı - Sayfa 15

Elektrikli Süpürge American Sanders AVAC18 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. American Sanders AVAC18 20 sayfaları.

Sayfayı Yazdır
Properly cleaning the vacuum accessories improves the appliance's
efficiency. Proceed as follows to clean the vacuum accessories:
1. Do what is required to make sure the machine is in a safe
condition (see
MACHINE
SAFETY'").
2. Take the appliance to the designated place for emptying the
collection tank.
ATTENTION: the place designated for this operation must
comply with current environmental protection regulations.
3. Remove the accessory from the extension, clean it with a damp
cloth.
2
1
1
Properly cleaning the fabric filter improves the appliance's efficiency.
To clean the fabric filter, proceed as follows:
1. Take all necessary steps to ensure that the device is in a safe
condition (see
MACHINE
SAFETY'").
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands.
2. Free the cover from the collection tank by releasing its hooks (1)
on the side of the collection tank ( Fig. 1).
3. Remove the cover (2) from the collection tank (Fig.2).
4.
Put the cover delicately on the floor.
1
1
To dispose of the appliance, take it to a demolition center or an
authorized collection center.
Before scrapping the appliance, it is necessary to remove and
separate out the following materials, then send them to the appropriate
collection centers in accordance with applicable environmental
hygiene regulations:
•
Electric and electronic parts*
•
Plastic parts
•
Metallic parts
(*) In particular, contact your distributor when scrapping electric and
electronic parts.

CONTROLLING AND CLEANING THE VACUUM ACCESSORIES UNIT

CONTROLLING AND CLEANING THE FABRIC FILTER

2
2
ATTENTION: When it is completely dry insert it into the accessories
support on the rear of the collection tank (optional accessory).
4. Remove the female part of the extension from the male part, clean it
under running water.
ATTENTION: When it is completely dry insert it into the accessories
support on the rear of the collection tank (optional accessory).
5. Remove the vacuum hose (1) (Fig.1) from the vacuum nozzle (2) in
the cover of the collection tank, clean it under running water.
ATTENTION: When it is completely dry insert it into the accessories
support on the rear of the collection tank (optional accessory).
5. Remove the collection bag (3) from inside the appliance (Fig.3).
6. Remove the fabric filter (4) from inside the appliance (Fig.4).
7. Take it to a suitable place for cleaning.
ATTENTION: the place designated for this operation must comply
with current environmental protection regulations.
8. Vacuum the fabric filter with another vacuum cleaner.
9. Clean the fabric filter with an air jet from a distance of more than 20cm.
10. To refit the fabric filter carry out the operations in the reverse order.
3
3

DISPOSAL

15
4
4