Akura MSD306 Hızlı Başlangıç Kılavuzu - Sayfa 3

LCD TV Akura MSD306 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Akura MSD306 3 sayfaları. Msd306
Ayrıca Akura MSD306 için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (3 sayfalar)

Sayfayı Yazdır
Akura MSD306 Hızlı Başlangıç Kılavuzu
Place the TV face down
on a suitable surface with
the base mounting facing
towards you (Fig 1).
Place the base plate onto
the TV ensuring the
locating pegs (Fig 2) are
located in the Locating
holes.
Fit the four screws provided into the
holes as shown in Fig 3. Tighten
using a No 1 Posi screwdriver.
If wall mounting the TV see page 28
in the Main Instruction book.
To mount the TV on a wall you need to purchase an adjustable (400 x 200mm) bracket.
Remove the screws as shown above.
Mount the wall bracket as described by the manufacturer.
Mount the TV to the wall bracket using 4 x 5mm x 10mm set screws. (Do NOT use longer screws as the internal parts of
the TV may be damaged).
Akura accepts no responsibility for damage, caused to or by, incorrect mounting of the wall bracket.
Base fitting and removal.
Fig 1
Fig 2
Fig 3