BOBPERRY AUDIO Ducker Pro 2 Manuel - Sayfa 5
Monitör BOBPERRY AUDIO Ducker Pro 2 için çevrimiçi göz atın veya pdf Manuel indirin. BOBPERRY AUDIO Ducker Pro 2 18 sayfaları.
Sayfayı Yazdır
SPECTROGRAM AND WAVEFORM DISPLAY
The Ducker Pro 2 Display has three modes: SPEC, AUTO and WAVE.
Display WAVE Mode
Click WAVE to enable WAVE mode. In this mode, the Display always shows the Waveform
Display, displaying the following signals:
●
Red: Main Input
•
●
Blue: Main Output
•
●
White: Aux Input
•
●
Top White: Gain Reduction
•
The white Aux Input waveform will be displayed in front of the other waveforms when setting
the Threshold or Hysteresis, and when in FILTER LISTEN mode.
You can use your mouse wheel or trackpad scroll function to zoom in and out.
Threshold and Hysteresis Lines
Whenever hovering over the Threshold or Hysteresis dials, or over the Waveform Display
itself, these lines are displayed. You can use your mouse or trackpad to set Threshold and
Hysteresis directly on the Display.
Bob Perry Ducker Pro 2 Copyright © 2015-2021 Jonas Peters
VST is a software and trademark of Steinberg Media Technologies GmbH.
Bob Perry Ducker Pro 2 – Manual – Page 5/18
20210113160816