BobsCNC E3 Manuel - Sayfa 3

Elektrikli Alet BobsCNC E3 için çevrimiçi göz atın veya pdf Manuel indirin. BobsCNC E3 8 sayfaları. Cnc router engraver bearing and rail dust kit
Ayrıca BobsCNC E3 için: Sorun Giderme Kılavuzu (16 sayfalar), Hızlı Başlangıç Kılavuzu (3 sayfalar)

Sayfayı Yazdır
BobsCNC E3 Manuel
It is a good idea to apply dry lube to the threaded rod once a
month . Dry lube is a good lubricant for the dusty environment
Step 1
Step 2
created when operating Your E3 and E4CNC.
Remove the washer and nut assembly from your old
mount and insert the assembly in the new Z Frame
Supports.
Mount the washer and nut assembly on the new Z Frame
securing with a zip tie. Secure the Frame Mount supports
with six M-4 screws and nuts.
Not included in the kit.
Page 3