Canon 330 Kullanıcı Kılavuzu - Sayfa 2

Dijital Kamera Canon 330 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Canon 330 2 sayfaları. Canon digital camera user manual
Ayrıca Canon 330 için: Broşür ve Teknik Özellikler (8 sayfalar)

Sayfayı Yazdır
Step 4 Installing the Software on the Windows Platform (continued)
C.
Install the driver.
The TWAIN or WIA driver is required when the camera is connected to
the computer. The installation procedures vary between Windows
versions.
a.
Set the mode dial (PowerShot S330 DIGITAL ELPH/DIGITAL
IXUS 330) or the mode switch (PowerShot S200 DIGITAL
2
ELPH/DIGITAL IXUS v
) to
.
b.
Turn the camera's power on.
Press the ON/OFF button until the green power lamp lights.
PowerShot S200 DIGITAL ELPH/
PowerShot S330 DIGITAL ELPH/
DIGITAL IXUS 330
DIGITAL IXUS v
2
Windows 98
c.
Install the TWAIN driver.
The Insert Disk dialog appears. Click [OK] without inserting
the Canon Digital Camera Solution Disk.
Click the [Browse] button.
Double-click the drive (usually the [C:\] drive) on which you installed
the software to display all of its folders.
PowerShot S330 DIGITAL ELPH/ DIGITAL IXUS S330:
Double-click the following folders in the order [Program Files],
[Canon], [IXY300A PSS330 IXUS330 TWAIN].
PowerShot S200 DIGITAL ELPH/ DIGITAL IXUS v
2
:
Double-click the following folders in the order [Program Files],
[Canon], [IXY200A PSS200 IXUSV2 TWAIN].
Click [OK]. When the Insert Disk dialog reappears, click [OK].
The driver will install itself automatically and the Event dialog will
display, allowing you to select a program to start.
d.
Select a program to start.
Select [Canon ZoomBrowser EX] and click [OK]. ZoomBrowser EX
will start.
Confirm that [Display images in the Camera Window] is selected
and click the [Finish] button.
Windows 2000
c.
Install the TWAIN driver.
The Add New Hardware Wizard will appear and automatically install
the TWAIN driver.
Once the installation is complete, the Event dialog will display,
allowing you to select a program to start.
If you are prompted to restart the computer, restart the computer
according to the onscreen messages.
d.
Select a program to start.
Select [Canon ZoomBrowser EX] and click [OK]. ZoomBrowser EX
will start.
Confirm that [Display images in the Camera Window] is selected
and click the [Finish] button.
*EC118116hkQSGE,vGM
2
Step 4 Installing the Software on the Windows Platform (continued)
Windows Me
c.
Install the WIA driver.
The Add New Hardware Wizard will appear and automatically install the
WIA driver.
Once the installation is complete, the Scanners and Cameras Wizard
start-up event dialog appears. Click [Cancel].
d.
Start ZoomBrowser EX.
Double-click the [Canon ZoomBrowser EX] icon on the desktop.
ZoomBrowser EX starts.
A confirmation message will appear the first time ZoomBrowser EX
starts, asking whether you wish to register the [My Pictures] folder in
ZoomBrowser EX. Click [Yes] or [No].
e.
Select a camera.
In the Tree View Area, click [Canon Camera].
Windows XP
c.
Install the WIA driver.
The Found New Hardware Wizard will appear and automatically install
the WIA driver.
Once the installation is complete, The ZoomBrowser start-up event
dialog and the Scanners and Cameras Wizard start-up event dialog will
both display.
d.
Select a program to start.
Click [OK] in the ZoomBrowser EX start-up event dialog.
ZoomBrowser EX will start.
Confirm that [Display images in the Camera Window] is selected and
click the [Finish] button.
The Camera Window will open and display the camera images.
Step 5
Downloading Images to a
Computer (Windows)
A.
Create a new folder for saving images from the camera.
In the Tree View Area, right-click the [Image Library One] folder, select [New
Folder] from the pop-up menu and input a folder name. (For example,
[Travel] or [Wedding])
Select the newly created folder.
Step 5 Downloading Images to a Computer (Windows) (continued)
B.
Download the images from the camera.
Selected images
Select the images you wish to download from the Camera window and
click the [Download] button.
The selected images are saved to the computer disk and appear in the
Browser Display Area.
• The folder you created above normally appears within the
[C:\Program Files\Canon\ZoomBrowser EX\Image Library One]
folder. The downloaded image files are saved to the folder you
created.
Step 4
Installing the Software on the
Macintosh Platform
A.
Install the software.
• For more information about the system requirements, please
refer to the Software Starter Guide.
• Close any programs that are running.
a.
Set the Canon Digital Camera Solution Disk in the computer's
CD-ROM drive.
Mac OS 8.6 - 9.2:
Double-click the CD-ROM icon, followed by the
[Mac OS 8/9] and [Canon Digital Camera Installer]
icons.
Mac OS X:
Double-click the CD-ROM icon, followed by the
[Mac OS X] and [Canon Digital Camera Installer]
icons.
b.
Click [Digital Camera Software Installation].
Mac OS 8.6 – 9.2 screen shot shown.
c.
Follow the onscreen instructions.
The software required for the camera will be installed.
Step 5
Downloading Images to a
Computer (Macintosh)
A.
Connect the USB cable to the computer.
If the computer has two USB ports, you can use either one of them.
USB Port
USB Cable
3/29/02, 2:16 PM
Step 5 Downloading Images to a Computer (Macintosh) (continued)
B.
Connect the USB cable to the camera.
Open the terminal cover and connect the cable.
PowerShot S330 DIGITAL ELPH/
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS 330
DIGITAL IXUS v
2
C.
Set the mode dial (PowerShot S330 DIGITAL ELPH/DIGITAL
IXUS 330) or the mode switch (PowerShot S200 DIGITAL
ELPH/DIGITAL IXUS v
2
) to
.
D.
Turn the camera's power on.
Press the ON/OFF button until the green power lamp lights.
PowerShot S330 DIGITAL ELPH/
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS 330
DIGITAL IXUS v
2
Mac OS 8.6 - 9.2
ImageBrowser will start and open the
ImageBrowser Automation Wizard dialog.
Confirm that [Display Images] is selected and click
the [OK] button.
Mac OS X
Double-click the [Canon ImageBrowser] icon on
the desktop. Once ImageBrowser is started, click
[Canon Camera] in the Explorer View section.
E.
Set the communication settings (first time connection only)
Mac OS 8.6 – 9.2 screen shot
shown.
Confirm that [USB Port] and your camera model name are selected and
click the [Set] button.
The Camera window will open and display the camera images.
F.
Create a new folder for saving images from the camera.
Mac OS 8.6 – 9.2 screen shot shown.
In the Explorer View section, select [Macintosh HD]. From the [File]
menu, select [New Folder] and input a folder name. (For example,
[Travel] or [Wedding])
Select the newly created folder.
G.
Download the images from the camera.
Selected images
Select the images you wish to download in the Camera window and
click the [Download] button.
The selected images are saved to the computer and appear in the
Browser area.