Euro-Pro Bravetti F1011H Kullanıcı El Kitabı - Sayfa 4
Fryer Euro-Pro Bravetti F1011H için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Euro-Pro Bravetti F1011H 6 sayfaları. 2 l. deep fryer
Sayfayı YazdırGETTING TO KNOW YOUR DEEP FRYER
1.
Main Unit
2.
Oil Container/Reservoir
3.
Cover Release Button
4.
Removable Cover
5.
Filter
6.
Viewing Window
7.
Frying Basket
8.
Frying Basket Handle
Technical Specifications
Voltage:
120V., 60Hz.
Power:
1500 Watts
*Illustration may differ from actual product.
9.
On/Off Button
10. Temperature Control Knob
11. Power "On Light
12. Ready Indicator Light
13. Heating Elements
14. Removable Control Panel
15. "Break Away" Power Cord
2
OPERATION INSTRUCTIONS
Detachable "Break Away"
Power Cord
Your deep fryer has been specifically
designed with your safety in mind. Your
deep fryer has a unique detachable
power supply cord. This power supply
cord is designed to "break away" from
the fryer in the event that the power
cord or fryer is inadvertently pulled or
tugged. This is intended to prevent the
tipping of the appliance and hazardous
spillage of hot oil. It is NOT intended to
disconnect the fryer during normal use
To connect the power cord - note the
instructions on the cord plug area - "this
side up". Place cord into opening - you
will feel the magnetic pull. Slide cord
into slot until it connects. (Fig. 8)
Fig. 8
CAUTION: D
o not use the "break -
away" power cord to disconnect the
deep fryer. Always disconnect plug from
electrical outlet first before removing the
power cord.
WARNING
: The "break-away" power
cord is only for accidental disconnection
of the deep fryer. It is not to be removed
during normal operation. If the cord
should be disconnected from the unit
during operation, the user should
immediately unplug the power cord
from the electrical wall outlet before any
attempt to reconnect the magnetic cord
back to the deep fryer unit. Do not
come in contact with the magnetic
connection of the power cord while it is
plugged into electrical wall outlet. Injury
can occur.
CAUTION:
Do not attempt to defeat
the magnetic cord connection by
attempting to permanently attach the
power cord to the deep fryer.
How To Reset the Deep Fryer
If for some reason the deep fryer stops
heating, the reason might be that the
safety reset switch has disconnected. To
reconnect the deep fryer, follow the
instructions below:
• Allow the deep fryer to cool completely.
• Remove the control panel from the
unit.
• Push the thermostat reset button
located on the back of the control
panel with the back of a ball point
pen. (Fig. 9) The unit will beep to
indicate that it has re-set.
Fig. 9
Thermostat
Reset Button
7