Euro-Pro EP91 Kullanıcı El Kitabı - Sayfa 3
Gıda İşlemcisi Euro-Pro EP91 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Euro-Pro EP91 6 sayfaları. 120v., 60hz., 800watts
Ayrıca Euro-Pro EP91 için: Kullanıcı Kılavuzu (1 sayfalar), Kullanıcı El Kitabı (6 sayfalar)
CLEANING & MAINTENANCE
CAUTION:
Make sure that the unit is unplugged from power source and control
button is on "OFF" before inserting or removing any attachments and
before cleaning.
•
Never immerse the unit, cord or plug
in water or any other liquid.
•
Clean the main unit with a damp
cloth only.
•
Only the stainless steel blades can
be washed in the dishwasher.
•
All other parts can be cleaned in
warm sudsy water using regular
dishwashing liquid.
•
If food has spilled over on to the
main unit, use the pointy end of the
spatula to clean the cracks and
crevices of the base under the food
processor bowl. (Fig. 14)
Fig. 14
Hints & Tips:
•
The double chopping blade can be
used for chopping meat, fish,
vegetables, cheese, etc. setting
the speed to maximum.
•
For finer chopping, increase the
length of time you process.
•
For coarser chopping, use the pulse
button for a few seconds and monitor
food texture.
•
Pre-cut larger pieces to make them fit
into the feed tube. When chopping
hard foods (e.g. meat, cheese) cut
into 1 "/2.4 cm cubes.
•
For shredding, place food horizontally
into the feed tube, for slicing place the
food vertically.
Re-settable Thermal Safety
Device
Your EURO-PRO Food Processor has
been designed with a unique safety
system which prevents damage to the
unit's motor and drive system, should
you inadvertently overload your
appliance. The safety system will
automatically cut the electric power to
the appliance when the device senses
an overload or excessive temperature
in the motor or drive system. Should
this occur during use and the appliance
stops functioning, follow the re-setting
procedure below:
1.
Turn the "ON/OFF" speed control
to the "OFF" position
2.
Unplug the unit from the wall
receptacle.
3.
Remove and empty the processor
bowl. Ensure that no food is
jamming the cutting blades or
attachments.
4.
Allow the appliance to cool down
for a minimum of 30 minutes.
5.
Re-install the processor bowl and
re-plug appliance in the wall outlet.
6.
Proceed to use the appliance as
before. Should the appliance still
fail to operate, turn the "ON/OFF"
speed control to the "OFF" position
and unplug from the wall outlet.
Allow the appliance to cool down
for an additional 1 to 2 hours. After
this time has passed, repeat the
restart procedure, steps 5 and 6
above.
8
IMPORTANT SAFEGUARDS
Read Instruction Manual Before Use
When using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions before using
the appliance. It is suggested
that you keep these instructions
in a safe place for future
reference.
2. Your voltage must correspond to
the voltage printed on the bottom
of the appliance.
3. To protect against electrical
shock, do not immerse the motor
housing (base), cord, or plug in
water or other liquid.
4. Close supervision is necessary
when the appliance is used by or
near children.
5. Unplug appliance from outlet
when not in use, before putting
on or taking off parts and before
cleaning.
6. Avoid touching moving parts at
all times.
7. Do not operate the appliance with
a damaged cord or plug, or after
the appliance malfunctions, has
been dropped or damaged in any
manner. Return the appliance to
EURO-PRO Operating LLC for
examination, repair, electrical or
mechanical adjustment.
8. The use of attachments including
canning jars not recommended
by the manufacturer may cause
fire, electric shock or injury to
persons.
IMPORTANT NOTICE
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electrical shock, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not modify the plug in any way.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
9.
Do not use outdoors.
10. Do not let cord hang over edge of
table or counter or touch hot
surfaces.
11. Keep hands and utensils away
from moving blades or discs
while processing food to reduce
the risk of severe injury to
persons or damage to the food
processor. A scraper may be
used but must be used only when
the food processor is not running.
12. Blades are sharp. Handle
carefully. When handling the
chopper blade always hold it by
the plastic hub.
13. To reduce the risk of injury, never
place cutting blades or discs on
the base without first putting bowl
properly in place.
14. Be certain cover is securely
locked in place before operating
appliance.
15. Never feed food by hand. Always
use food pusher.
16. Do not attempt to by-pass the
cover interlock mechanism.
17. Always operate food processor
with the cover in place.
REV. 03/03B
1