Akura APTCDC832PR Kullanım Kılavuzu - Sayfa 8
Mikro Müzik Sistemi Akura APTCDC832PR için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Akura APTCDC832PR 16 sayfaları. 3cd cassette player micro system
Sayfayı YazdırAUTOMATIC TUNING
1. Press the "TUNER / BAND" button to enter radio mode.
2. Press the "TUNER / BAND" button to select AM or FM.
3. Press the "SKIP +" or "SKIP -" button to start automatic tuning process.
4. When a station is tuned in, the tuning process will stop automatically and you can listen to your
chosen station.
MANUAL TUNING
This is for selecting stations, which cannot be tuned automatically. (manual selection)
To tune a channel manually.
- Skip step 4 in the above procedures.
- In step 3, each time the "SKIP +" or "SKIP -" button is pressed momentarily (0.5 second or less),
the frequency changes by a fixed step:
FM: 0.05 MHz steps
AM: 9 kHz steps
MEMORY PRESET
1. Repeat step 1 to 4 in the AUTOMATIC TUNING procedures.
2. When you have a station you wish to store. Press the "MEMORY" button to start the preset process.
3. Display will show the memory sequence number and a flashing "00".
4. Press the "M - UP" or "M - DOWN" button to select the preset station number.
5. Press again the "MEMORY" button to store your chosen station.
6. Once all the stations are stored, press the "M - UP" or "M - DOWN" button to listen to
your chosen station.
MONO / STEREO
If the station received is noise free select Stereo. If the station is poor or noisy select Mono.
RADIO OPERATION
Page 6