Barnes UT17 Manuel

Su Pompası Barnes UT17 için çevrimiçi göz atın veya pdf Manuel indirin. Barnes UT17 4 sayfaları. Portable utillity submersible pump 1/6 hp, 120 volt, 60hz, 1ph

Barnes UT17 Manuel
Portable Utillity Submersible Pump
Model: UT17 - 1/6 Hp, 120 Volt, 60Hz, 1Ph
DIMENSIONS
IMPORTANT!
Read all instructions in this manual before operating pump.
As a result of Crane Pumps & Systems, Inc., constant product improvement program,
product changes may occur. As such Crane Pumps & Systems reserves the right to
change product without prior written notification.
A Crane Co. Company
420 Third Street
Piqua, Ohio 45356
Phone: (937) 778-8947
Fax: (937) 773-7157
www.cranepumps.com
BARNES
BARNES
DISCHARGE ............................................... 3/4" G.H.T. Male, Vertical
LIQUID TEMPERATURE ............................. 77°F (25°C) Continuous
MOTOR HOUSING ...................................... Thermoplastic
PUMP STRAINER ........................................ Thermoplastic
IMPELLER .................................................. 2 Vane Semi Open, Thermoplastic
SHAFT ........................................................ Steel
O-RINGS ...................................................... Buna-N
HARDWARE ............................................... Stainless Steel
CABLE ENTRY ............................................ 15 Ft. (4.5M) Cord with Plug and Pressure
CABLE TYPE ............................................... 18/3 SJTW
SEAL ............................................................ Single Mechanical
Material ............................... Carbon/Ceramic/Buna-N
UPPER BEARING ........................................ Single Row, Ball, Sealed
LOWER BEARING ....................................... Single Row, Ball, Sealed
MOTOR ........................................................ Air-Filled. With Class B Insulation
SINGLE PHASE ........................................... Permanent Split Capacitor (PSC).
83 West Drive, Bramton
Ontario, Canada L6T 2J6
Phone: (905) 457-6223
Fax: (905) 457-2650
®
SPECIFICATIONS
Grommet for Sealing and Strain Relief
Hardware - 300 Series Stainless
Includes Thermal Overload Protection in Motor
PERFORMANCE
Form No. 113829-Rev. G