Akura AVX665 Kullanıcı Kılavuzu - Sayfa 14

Set üstü kutular Akura AVX665 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Akura AVX665 20 sayfaları. High definition digital set top box

Sayfayı Yazdır

Active channels

• You can select broadcasts to be listed in the channel

list. To display speciﬁc types of broadcast, you

should use Active channel list setting.

• Select Active Channels by using " "/" " button.

• You can select a broadcast type option from the list

by using " "/" " button. Available modes are: TV

Only, Radio Only, Text Only, Favourites or Show

All (if available).

• Press the MENU button to save the recent changes

and exit.

Scan Encrypted

• When this setting is on, search process will locate

the encrypted channels as well. If it is set as Off,

encrypted channels will not be located in automatic

search or manual search.

• Use" "/" " buttons to highlight Scan Encrypted and

press " "/" " buttons to select YES or NO.

Output Settings

TV Type

• Digital terrestrial television channels can be

broadcast in a widescreen format which must be

output differently to normal and widescreen TV

sets.

• This function defines the screen format of the

connected TV to enable broadcasts' being displayed

correctly.

• Select 4:3 if you have a standard TV set with 4:3

aspect ratio.

• Select 16:9 if you have a widescreen TV.

• If you select Auto, TV type will be set automatically

according to the broadcast.

Note: This function also enables you to change TV

Type that you have previously selected during the

ﬁ rst time installation.

TV Out

• The set-top-box can output RGB and CVBS signal

via the TV SCART connector located on the rear

panel.

• Although the RGB format provides a better picture

quality, some devices might not support it.

AC3 Audio

• Highlight the AC3 Audio item by pressing " "/"

" buttons. Use the " "/" " buttons to set the AC3

Audio as On or Off.

• If the channel that you are watching supports AC3

Audio, you can turn this setting on.

SPDIF Delay

You can use this setting when there is an SPDIF

synchronization problem in the received broadcast.

Press the " " or " " butto to change the delay.

Digital Audio

• Use this setting to deﬁne digital audio out signal type.

• Use " " or " " buttons to set Digital Audio as

Bitstream or PCM.

• If your selected channel includes compressed sound

stream, you can connect your set-top box to an

external equipment by using digital audio out of your

set-top box for enabling the sound output.

• If you have no external sound equipment, please

select Digital Audio Out as PCM by using " " or "

" button.

HDMI Resolution

• This setting enables you to change HDMI resolution

as 576P, 720P, 1080i or 1080P.

• Use " "/ " " button on the remote control to change

resolution and press GREEN button to apply.

HDMI HDCP

• In the Conﬁ guration menu, highlight the HDMI HDCP

item by pressing " " or " " buttons.

• Use the " " or " " button to set the HDMI HDCP

as On or Off.

Receiver Upgrade

• To ensure that your set-top-box always has the most

update information, you can use this setting. In order

for the proper operation, please ensure that the box

is set to standby mode.

English - 13 -