American Standard Cascada Accent Bath Accessories 9435.101 Montaj ve Kurulum Talimatları
İç Mekan Mobilyaları American Standard Cascada Accent Bath Accessories 9435.101 için çevrimiçi göz atın veya pdf Montaj ve Kurulum Talimatları indirin. American Standard Cascada Accent Bath Accessories 9435.101 2 sayfaları. American standard cascada mirror/stool assembly and installation instructions
Sayfayı Yazdır
ASSEMBLY & INSTALLATION
INSTRUCTIONS
CASCADA MIRROR 9435.101
CASCADA STOOL 9437.100
Thank you for selecting our products... products which have been the benchmarks of fine quality for over 100 years. To help
insure that the installation process will proceed smoothly, please read these instructions carefully before you begin. Also,
review the recommended tools and materials list; carefully unpack and examine your new plumbing fixture.
To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes fading. Also avoid extreme
changes in temperature by arranging furniture away from radiators, heat and air vents, and air conditioning units. Avoid placing
furniture directly under windows.
Recommended Tools & Materials
Level
CASCADA MIRROR 9435.101
MIRROR INSTALLATION
NOTE: Where possible, try to affix to a stud or provide
adequate wall support for the size and weight of the mirror.
Mirror comes with Mounting Pockets on frame.
Affix screws to wall using drywall anchors supplied at
dimensions shown.
(21-1/8"
height
63-3/8"
from floor.
CASCADA STOOL 9437.100
Place the stool at the desired location.
Leave clearance on the side for the storage
door to open up.
P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A m e r i c a n S t a n d a r d I n c .
© A m e r i c a n S t a n d a r d I n c . 2 0 0 6
™
Hammer
on centers). Suggested
10'
Phillips Screwdriver
Tape Measure
22"
559mm
36"
914mm
Drawer / Door
Drop-Leaf Shelf
Pull Hardware
with magnetic catch
FRONT VIEW
7-3/4"
197mm
DROP-LEAF SHELF IN OPEN POSITION
18"
457mm
- 1 -
Regular Screwdriver
Roughing-in Dimensions
36"
914mm
1-1/2"
38mm
6-1/4"
159mm
Roughing-in Dimensions
15"
381mm
Drill
22"
559mm
8-5/8"
219mm
21-1/8"
Keyhole
537mm
plate for
mounting
WEIGHT = 19 LBS.
BACK VIEW
7 3 01051-100 Rev.B