American Standard Champion 2087.212 Şartname Sayfası
İç Mekan Mobilyaları American Standard Champion 2087.212 için çevrimiçi göz atın veya pdf Şartname Sayfası indirin. American Standard Champion 2087.212 1 sayfaları. Champion select elongated toilet
Sayfayı Yazdır
CHAMPION
®
SELECT ELONGATED TOILET
❑
2087.212
• Vitreous china
• EverClean™ anti-microbial glaze
(available Summer 2006)
• Low-consumption (6.0 Lpf/1.6 gpf)
• Features Champion® Flushing System
performance platform
• 3" non-adjustable, fl apper-free fl ush valve
• Elongated siphon action jetted bowl
• 2-3/8" fully-glazed trapway
• Speed Connect™ tank/bowl coupling system
• Trip lever color-matched to toilet
• Sweeping pier on bowl
• 100% factory fl ush tested
• 2 bolt caps
• 10 year warranty
❑
3121.016 Elongated Bowl
❑
4272.216 Tank
Nominal Dimensions:
772 x 489 x 841mm
(30-3/8" x 19-1/4" x 33-1/8")
Fixture only, seat and supply by others
Compliance Certifi cations -
Meets or Exceeds the Following Specifi cations:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specifi cation for
Non-Adjustability - July, 2003 revision
To Be Specifi ed:
❏ Color:
❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black
❏ Seat: (please specify color)
❏ Champion
®
Slow Close Elongated #5325.010
❏ Rise & Shine Elongated #5324.019
❏ Laurel Elongated #5311.012
❏ Supply with stop:
© 2006 American Standard Inc.
CHAMPION
ELONGATED TOILET
FINISHED WALL
772mm
(30-3/8)
19mm ± 6mm
(1 ± 1/4)
216mm
(8-1/2)
470mm
(18-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
16mm
(5/8)
264mm
362mm
(10-3/8)
(14-1/4)
305mm
C/L OF OUTLET
(12)
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
IMPORTANT: Dimensions of fi xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
K27
®
SELECT
VITREOUS CHINA
489mm
(19-1/4)
356mm
(14)
SUPPLY
AS
REQ'D
387mm
(15-1/4)
*
254mm
(10)
152mm
(6)
FINISHED
FLOOR
254mm
(10)
Revised 5/06
841mm
(33-1/8)