American Standard Colony Fitright Round Front 10" Rough-In Toilet 2486.010 Şartname Sayfası

İç Mekan Mobilyaları American Standard Colony Fitright Round Front 10" Rough-In Toilet 2486.010 için çevrimiçi göz atın veya pdf Şartname Sayfası indirin. American Standard Colony Fitright Round Front 10" Rough-In Toilet 2486.010 1 sayfaları. Round front 10" rough-in toilet

Sayfayı Yazdır
COLONY™ FitRight™ ROUND FRONT
10" ROUGH-IN TOILET
❑
2486.010
• Vitreous china
• Low-consumption (6.0 Lpf/.6 gpf)
• 0" roughing-in
• Round front siphon action jetted bowl
• Fully glazed 2" trapway
• Pilot valve water control
• 2" Flapper flush valve
• Color-matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 00% factory flush tested
❑
3190.016 Bowl
❑
4006.016 Tank
Nominal Dimensions:
623 x 457 x 727mm
(24-/2" x 8" x 28-5/8")
Fixture only, seat and supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A2.9.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for
Non-Adjustability
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Seat: American Standard #5322.0 "Rise and
Shine" solid plastic closed front seat with cover.
❏ Seat: American Standard #5308.04 "Laurel"
molded closed front seat with cover.
❏ Alternate Seat:
❏ Supply with stop:
© 2008 AS America Inc.
ROUND FRONT 10" ROUGH-IN TOILET
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 254MM (0") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerance established by ANSI Standard A2.9.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
6
COLONY™ FitRight™
VITREOUS CHINA
8/08