Baroness LM2700 Teknik Bilgiler - Sayfa 2

Çim Biçme Makinesi Baroness LM2700 için çevrimiçi göz atın veya pdf Teknik Bilgiler indirin. Baroness LM2700 6 sayfaları. Backlapping
Ayrıca Baroness LM2700 için: Teknik Bilgiler (5 sayfalar)

Sayfayı Yazdır
Baroness LM2700 Teknik Bilgiler
If you are unable to obtain a satisfactory cut with just a light blade contact then you will need to back-
lap the cutting cylinders.
Back-lapping is an interim method of keeping the blades sharp in between re-grinding.
Before you start the process you will need the following:
A long handled brush. This can be made by using a wallpaper paste brush and extending the
handle by using a suitable length of tube. It is important to have the handle extended so that
your hands are nowhere near the rotating blades during the back-lapping process.
BACK-LAPPING A BARONESS LM2700
A pot of back-lapping paste. Back-lapping
paste is a water soluble abrasive grinding
paste.
It is available in different grades but the grade
that we would recommend for back-lapping
Baroness blades is 80 grit, or Course.