Domus Ventilation D-DMEV Kurulum Talimatları Kılavuzu - Sayfa 7

Hava Kontrol Cihazları Domus Ventilation D-DMEV için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Domus Ventilation D-DMEV 8 sayfaları. Continuous decentralised mechanical ventilation unit

Sayfayı Yazdır
30

4.0 MAINTENANCE

It is important that maintenance checks are recorded and that the
schedule is always adhered to, in all cases, the previous report should be
referred to.
Before any maintenance or cleaning operation, switch off the fan
and disconnect from the power supply.
4.1 Routine Maintenance
The magnetic front cover can be removed and cleaned with water and
a mild detergent using a soft cloth and the motor fan assembly can
be cleaned with a dry brush or dry cloth. Any other maintenance or
cleaning should be carried out by properly qualified personnel.
Ensure the unit does not come into contact with any kind of liquid
or solvent. If this should occur, contact a qualified technician before
reassembling the fan.
The motor does not require lubrication as it is of the maintenance
free "sealed for life" type.

5.0 WARRANTY

The 5 year warranty starts from the day of delivery and includes first
year parts and labour, remaining year parts only. This warranty is void if
the equipment is modified without authorisation, is incorrectly applied,
misused, disassembled, or not installed, commissioned and maintained
in accordance with the details contained in this manual and general
good practice.
The product warranty applies to the UK mainland and in accordance
with Clause 14 of our Conditions of Sale. Customers purchasing from
outside of the UK should contact Domus Ventilation Sales office for
further details.
Failure to maintain the unit as recommended will invalidate the
warranty.
671982 | SepTemBer 2021
6.0 END-OF-LIFE AND RECYCLING
Where possible components which can be largely recycled when the
product reaches its end-of-life have been used:
•
Fans, motors, controls, actuators, cabling and other electrical
components can be segregated into Weee recycling streams.
•
Sheet metal parts, aluminium extrusion, heating/cooling coils and
other metallic items can be segregated and fully recycled.
•
epp, plastic ducting, nylon corner pieces, plastic heat exchangers,
packaging material and other plastic components can be segregated
into mixed plastic and widely recycled.
•
Cardboard packaging, wood, and other paper components can be
largely recycled or fully processed in energy from waste centres.
•
Filter Disposal: Cardboard framed filters should be fully processed
in energy from waste centres, contact your local civic amenity site /
household waste recycling centre regarding metal / wire framed filters.
•
remaining Items can be further segregated and processed in
accordance with the zero waste hierarchy. please call After Sales
Support for further information on items not listed above.
Ensure that this product is made safe from any electrical / water
/ refrigerant supplies before dismantling commences. This work
should only be undertaken by a qualified person in accordance
with local authority regulations and guidelines, taking into
account all site based risks.
This product complies with EU Directive 2002/96/EC.
The symbol of the crossed-out dustbin indicates that this product
must be collected separately from other waste at the end of its
life. The user must, therefore, dispose of the product in question
at suitable electronic and electro-technical waste disposal
collection centres, or else send the product back to the retailer
when purchasing a new, equivalent type device.
Separate collection of decommissioned equipment for recycling,
treatment and environmentally compatible disposal helps to
prevent negative effects on the environment and on health
and promotes the recycling of the materials that make up the
equipment.
Improper disposal of the product by the user may result in
administrative sanctions as provided by law.
7.0 AFTER SALES AND REPLACEMENT PARTS
For technical assistance or further product information, including spare
parts and replacement components, please contact the After Sales
Department.
If ordering spares please quote the serial number of the unit together
with the part number, if the part number is not known please give a full
description of the part required. The serial number will be found on the
identification plate attached to the unit casing.
Telephone 03443 715 523
pAGe 7