American Standard Colony Corner 1730 SERIES Kurulum Talimatları

Küvetler American Standard Colony Corner 1730 SERIES için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. American Standard Colony Corner 1730 SERIES 4 sayfaları. Corner whirlpool/bathing pool high gloss acrylic shown less all fittings
Ayrıca American Standard Colony Corner 1730 SERIES için: Kullanım ve Bakım Talimat Kılavuzu (10 sayfalar)

Sayfayı Yazdır

COLONY™ CORNER

HIGH GLOSS ACRYLIC

SHOWN LESS ALL FITTINGS

1064mm

(41-7/8)

ALT.

PUMP

1546mm

(60-7/8)

318mm

686mm

(12-1/2)

(27)

(6) JETS

2134mm

(84

TOP OF

51mm

DECK

(2)

445mm

(17-1/2)

70mm

(2-3/4)

BATH SUPPORT MATERIAL

* NOTE: If the optional apron (PN 0730.121) is to be used with this

tub, the stringer height must be referenced from the finished floor.

GENERAL SPECIFICATIONS FOR 1730 WHIRLPOOL

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

WHIRLPOOL MIN. OPERATING VOL.

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

)

WHIRLPOOL ELECTRICAL SPECIFICATIONS

SYSTEM I PUMP

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor

immediately. After inspection and during installation, protect the bath from construction damage. After installation, and before

enclosing with wallboard, tile, etc., water test the unit and check for leaks.

If a whirlpool, do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect

the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or

piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing

materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess

installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

753451-100 Rev. A

1730 SERIES

WHIRLPOOL/BATHING POOL

INSTALLATION INSTRUCTIONS

1514mm

(59-5/8)

PUMP

1168mm

(46

)

C/L OF DRAIN

2 AIR

OUTLET

VALVES

)

83mm

(3-1/4)

ROUGH

38mm (1-1/2)

FLOOR

O.D. TAILPIECE

60 x 60 x 19-1/2 In.(1524 x 1524 x 495mm)

115 Lbs. (52 Kg.)

908 Lbs. (412 Kg.)

95 Gal. (360 L.)

65 Gal. (246 L.)

30 x 50 In. (762 x 1270mm)

45-1/2 x 63-1/2 In.(1156 x 1613mm)

13 In. (330 mm)

36 Lbs./Sq. Ft. (177 Kgs/Sq. m.)

27.8

1.1 HP, 9.9 AMPS, 120V.

THANK YOU...

for selecting an American Standard bath. Your new

bath is shipped to you after careful inspection. The

whirlpool version is completely assembled with pump,

motor, and system piping. All you need to finish the

installation are your selected fittings and electrical

connections for a whirlpool.

To insure maximum performance and pleasure from

this product, please follow the instructions and

cautions.

483mm

PROVIDE ACCESS

(19)

FOR SERVICING

PUMP & CONTROLS

ON/OFF

SWITCH

List of Optional Components (not included):

• Apron Kit*

LEVELING

STRINGER

* see your American Standard Distributor

NOT FOR

SUPPORT

List of Required Components (not included):

495mm

• Drain 1583.470*

(19 -1/2)

117mm

• Bath Filler*

(4 -5/8)

* see your American Standard Distributor

List of Required Tools and Supplies:

Tools

• Level

• Tape Measure

• Pipe Wrench

• Slip Joint Pliers

• Screw Driver

• Standard

• Personal Safety

• Caulking Gun

Woodworking Tools

Equipment

All product names listed herein are trademarks

of American Standard Inc. unless otherwise noted.

Supplies

• Nails

• Putty

• Caulking (waterproof)

• 1 x 3 or 2 x 2

Stringers

• Drop Cloth

• 15 amp GFCI

Outlet

• Cement, Plaster,

Grout