American Standard Ellisse 2709.028WC.K2 Şartname Sayfası - Sayfa 2
Küvetler American Standard Ellisse 2709.028WC.K2 için çevrimiçi göz atın veya pdf Şartname Sayfası indirin. American Standard Ellisse 2709.028WC.K2 2 sayfaları. Oval whirlpool & bathing pool, high gloss
Ayrıca American Standard Ellisse 2709.028WC.K2 için: Şartname (2 sayfalar)
Sayfayı Yazdır
240 mm
(9-7/16)
SEE FTTG.SPECS
FOR DIMENSION
C L OF SUPPLIES
978 mm
(38-1/2)
489mm
(19-1/4)
76mm
(3)
C L OF DRAIN
OUTLET
C/L OF
SAFE-T-HEATER
VALVES
REMOVABLE BLANK
86mm
(3-3/8)
102mm
305mm
(4)
(12)
38mm
(1-1/2)
502mm
(19-3/4 )
464mm
(18-1/4)
1-1/2 N.P.T.M.
THREADS
1-1/2 O.D.
TAILPIECE
GENERAL SPECIFICATIONS FOR 2709 WHIRLPOOL
INSTALLED SIZE
69-1/4 x 38-1/2 x 19-3/4 In.(1759 x 978 x 502mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM II PUMP
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUPPORT
OF BATH BY INTEGRAL FEET. NO ADDITIONAL SUPPORT IS REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
▲
CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
ON SYSTEM II: CONTROL MODULE TO BE MOUNTED BEHIND ACCESS PANEL, A MINIMUM OF 152mm (6) ABOVE ROUGH FLOOR.
IMPORTANT: Dimensions of fi xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 / CSA
Certifi ed. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leafl et.
© 2007 American Standard Inc.
1759 mm
(69-1/4)
OUTLINE OF
CUTOUT
ON/OFF
SWITCH
305mm(12) X 229mm(9)
CUTOUT IN FLOOR FOR DRAIN
PROVIDE ACCESS
TO PUMP FOR
SERVICING ON ALL
INSTALLATIONS
C/L OF
SHOWER ARM
C/L OF
SPOUT
1651-1981mm
(65-78)
OPTIONAL
INTEGRAL
FEET
SUPPORT
ROUGH
FLOOR
35mm
(1-3/8)
98mm
(3-7/8)
107 Lbs. (49 Kg.)
640 Lbs. (291 Kg.)
64 Gal. (243 L)
53 Gal. (201 L)
45 x 23 In. (1143 x 584mm)
63 x 32 In. (1600 x 813mm)
13 In. (330mm)
35 Lbs./Sq.Ft. (166 Kgs./Sq.m)
2.1 HP, 15.6 AMPS, 120V.
WHIRLPOOL & BATHING POOL
SEE FTTG.SPECS
FOR DIMENSION
C L OF SUPPLIES
PUMP
978 mm
(38-1/2)
489mm
(19-1/4)
76mm
95mm
(3-3/4)
305mm
38mm
(1-1/2)
502mm
(19-3/4 )
464mm
(18-1/4)
GENERAL SPECIFICATIONS FOR 2709 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
25.6
(PROJECTED AREA)
49.4
PTS.
CUBE (FT 3 )
H44
ELLISSE OVAL™
1759 mm
(69-1/4)
240 mm
(9-7/16)
305mm(12) X 229?mm(9)
CUTOUT IN FLOOR FOR DRAIN
(3)
C L OF DRAIN
OUTLET
SHOWER ARM
C/L OF
VALVES
C/L OF
102mm
SPOUT
(4)
(12)
1-1/2 N.P.T.M.
35mm
THREADS
(1-3/8)
1-1/2 O.D.
TAILPIECE
69-1/4 x 38-1/2 x 19-3/4 In.
(1759 x 978 x 502mm)
45 X 23 In. (1143 x 584mm)
63 x 32 In. (1600 x 813mm)
34 Lbs./Sq.Ft. (165 Kgs./Sq.m)
HIGH GLOSS
OUTLINE OF
CUTOUT
C/L OF
1651-1981mm
(65-78)
OPTIONAL
INTEGRAL
FEET
SUPPORT
ROUGH
FLOOR
98mm
(3-7/8)
77 Lbs. (35 Kg.)
611 Lbs. (275 Kg.)
64 Gal. (243 L)
13 In. (330mm)
25.6
49.4
Revised 8/07