American Standard Heritage 2805.028WC Teknik Özellikler - Sayfa 2
Küvetler American Standard Heritage 2805.028WC için çevrimiçi göz atın veya pdf Teknik Özellikler indirin. American Standard Heritage 2805.028WC 2 sayfaları. 5' x 42" whirlpool and bathing pool high gloss
Sayfayı Yazdır
762mm
(30)
305mm
(12)
1067mm
(42)
SAFE-T-HEATER
REMOVABLE
51mm(2)
BLANK
546mm
(21-1/2)
495mm
(19-1/2)
ROUGH
FLOOR
INTEGRAL
FEET
SUPPORT
GENERAL SPECIFICATIONS FOR 2805 WHIRLPOOL
INSTALLED SIZE
60 x 42 x 21-1/2 In. (1524 x 1067 x 546mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
)
3
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM II PUMP
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP
OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.
■
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL APRON 9160.2800 and GRAB BAR KIT AVAILABLE AND MUST BE ORDERED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
●
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH
CIRCULATING SYSTEM PIPING, DRAIN OVERFLOW. MOUNTING HOLES DRILLED BY INSTALLER.
SUPPLY PIPING NOT INCLUDED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
© 2008 AS America Inc.
1524mm
(60)
INTEGRAL
FITTING DECK
PUMP
178mm x 381mm
(7 x 15)
FLOOR
PROVIDE ACCESS
CUTOUT
TO PUMP FOR
SERVICE ON ALL
INSTALLATIONS
19mm
(3/4)
OUTLINE OF CUTOUT
1486mm x 1029mm
(58-1/2 x 40-1/2)
LEVELING STRINGER
NOT FOR SUPPORT
133mm
(5-1/4)
C/L OF
OVERFLOW
64mm
(2-1/2)
1-1/2 N.P.T.
THREADS
1-1/2 O.D.
121mm
TAILPIECE
(4-3/4)
130 Lbs. (59 Kg.)
689 Lbs. (310 Kg.)
64 Gal. (243 L)
52 Gal. (197 L)
43 x 22 In. (1092 x 559mm)
55 x 35-1/2 In. (1397 x 902mm)
15 In. (381mm)
39 Lbs./Sq.Ft. (191 Kgs./Sq.m)
2.1 HP, 15.6 AMPS ,120V.
WHIRLPOOL AND BATHING POOL
152mm
(6)
305mm
C/L OF
(12)
DRAIN
1067mm
(42)
51mm(2)
546mm
(21-1/2)
495mm
(19-1/2)
GENERAL SPECIFICATIONS FOR 2805 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
27.8
CUBE (FT
)
3
47.4
H46
HERITAGE™ 5' x 42"
1524mm
(60)
INTEGRAL
762mm
FITTING DECK
(30)
178mm x 381mm
(7 x 15)
FLOOR
CUTOUT
LEVELING STRINGER
NOT FOR SUPPORT
ROUGH
1-1/2 N.P.T.
FLOOR
THREADS
INTEGRAL
1-1/2 O.D.
FEET
TAILPIECE
SUPPORT
60 x 42 x 21-1/2 In. (1524 x 1067 x 546mm)
43 x 22 In. (1092 x 559mm)
55 x 35-1/2 In. (1397 x 902 mm)
39 Lbs./Sq.Ft. (191 Kgs./Sq.m)
HIGH GLOSS
152mm
(6)
C/L OF
DRAIN
19mm
(3/4)
OUTLINE OF CUTOUT
1486mm x 1029mm
(58-1/2 x 40-1/2)
133mm
(5-1/4)
C/L OF
OVERFLOW
64mm
(2-1/2)
121mm
(4-3/4)
115 Lbs. (52 Kg.)
674 Lbs. (306 Kg.)
64 Gal. (243 L)
15 In. (381mm)
27.8
47.4
Revised 2/08