American Standard Town Square 2742.XXXW Series Kurulum Talimatları - Sayfa 3

Küvetler American Standard Town Square 2742.XXXW Series için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. American Standard Town Square 2742.XXXW Series 4 sayfaları. 6' x 42" whirlpool/bathing pool, high gloss acrylic shown less all fittings

Sayfayı Yazdır

ELECTRICAL INSTALLATION INSTRUCTIONS

All wiring must be performed by a licensed electrician in accordance with the national electrical code and all other

applicable codes.

WARNING:

When using electrical products, basic precautions should always be observed, including the following:

DANGER: RISK OF ELECTRIC SHOCK

Connect only to a circuit protected by a ground-fault circuit interrupter.

Grounding is required. The unit should be installed by a licensed electrician and grounded.

Install to permit access for servicing.

All building materials and wiring should be routed away from the pump body and heater (if equipped).

The air massage version should be installed on a 120 vac, 15 amp dedicated circuit. The whirlpool version should be

installed on a 120 vac, 20 amp dedicated circuit. The combination system requires a 120 vac, 20 amp dedicated circuit

for the whirlpool pump and a 120 vac, 15 amp dedicated circuit for the air pump. Each circuit must be a three (3) wire

circuit from the electrical supply panel. A grounded neutral wire and a third wire, earth ground, are essential. ADDING

THE SAFE-T-HEATER REQUIRES A SEPARATE 15 AMP MAXIMUM GFCI CIRCUIT.

ELE CTRICA L I N STA L LATI ON

FOR AIR MASSAGE : SEPARATE 15 AMP GFCI OUTLET

FOR WHIRLPOOL : SEPARATE 20 AMP GFCI OUTLET

FOR COMBINATION SYSTEMS : SEPARATE 15 AMP GFCI OUTLET

(AIR PUMP) AND A SEPARATE 20 AMP GFCI OUTLET (WHIRLPOOL PUMP)

1 2 0 VA C

GND.

753027-100 REV. E

ELECTRICAL DIAGRAM

READ AND FOLLOW ALL INSTRUCTIONS

W HIRL P OO L MO UNT ED

P UM P/M O TO R

(3)

AIR SW ITC H OR

WAL L T IME R