American Standard Town Square 2748.018WC.K2 Şartname Sayfası - Sayfa 2
Küvetler American Standard Town Square 2748.018WC.K2 için çevrimiçi göz atın veya pdf Şartname Sayfası indirin. American Standard Town Square 2748.018WC.K2 2 sayfaları. 5' x 42" whirlpool and bathing pool high gloss
Sayfayı Yazdır
ON/OFF
SWITCH
29-7/8"
(759mm)
14-1/2"
(368mm)
41-5/8"
(1057mm)
FLOOR CUTOUT
PROVIDE ACCESS
5" X 12"
TO PUMP FOR
(127 X 305mm)
SERVICE ON ALL
INSTALLATIONS
PUMP
OUTLINE OF
JETS (6)
SKID RESISTANT
SURFACE
PUMP
2"
C/L OF
(51mm)
OVERFLOW
5-3/4"
(146mm)
1-1/2" N.P.T.
THREADS
3-1/8"
3/4"
1-1/2" O.D.
(79mm)
(19mm)
TAILPIECE
GENERAL SPECIFICATIONS FOR 2748 WHIRLPOOL
INSTALLED SIZE
59-1/2 x 41-5/8 x 23 In. (1511 x 1057 x 584mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
)
3
WHIRLPOOL ELECTRICAL SPECIFICATIONS
WHIRLPOOL PUMP
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUMP
OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIALS BY OTHERS.
●
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING
SYSTEM PIPING AND DRAIN OVERFLOW. MOUNTING HOLES DRILLED BY INSTALLER.
OPTIONAL TILING BEAD KIT No. 751755-200 AVAILABLE.
■
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 / CSA Certified.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.
© 2008 AS America Inc.
59-1/2"
(1511mm)
3"
INTEGRAL
(76mm)
FITTING DECK
2-1/2" X 14"
(64 X 356mm)
OUTLINE OF CUTOUT
SUCTION
58-1/4" X 40-1/4"
(1480 X 1022mm)
LEVELING STRINGER
(NOT FOR SUPPORT)
SAFE-T-HEATER
REMOVABLE
BLANK
(584mm)
21"
ROUGH
(533mm)
FLOOR
INTEGRAL
FEET
SUPPORT
110 Lbs. (50 Kg.)
611 Lbs. (278 Kg.)
60 Gal. (227 L)
55 Gal. (208 L)
34 x 24 In. (864 x 610mm)
52 x 31 In. (1321 x 1321mm)
12-1/2 In. (318mm)
40 Lbs./Sq.Ft. (194 Kgs./Sq.m)
27.8
45.4
1.6 HP, 9.7 AMPS ,120V.
TOWN SQUARE
WHIRLPOOL AND BATHING POOL
5-1/4"
(133mm)
14-1/2"
C/L OF
(368mm)
DRAIN
OUTLET
EDGE OF
FLOOR
CUTOUT
41-5/8"
(1057mm)
3/4"
(19mm)
OUTLINE OF
SKID RESISTANT
SURFACE
23"
5-3/4"
(146mm)
3-1/8"
3/4"
(79mm)
(19mm)
GENERAL SPECIFICATIONS FOR 2748 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
H26
59-1/2"
(1511mm)
INTEGRAL
FITTING DECK
29-7/8"
2-1/2" X 14"
(759mm)
(64 X 356mm)
FLOOR CUTOUT
5" X 12"
(127 X 305mm)
OUTLINE OF CUTOUT
58-1/4" X 40-1/4"
(1480 X 1022mm)
LEVELING STRINGER
C/L OF
(NOT FOR SUPPORT)
OVERFLOW
ROUGH
FLOOR
INTEGRAL
1-1/2" N.P.T.
FEET
THREADS
SUPPORT
1-1/2" O.D.
TAILPIECE
59-1/2 x 41-5/8 x 23 In.
(1511 x 1057 x 584mm)
34 x 24 In. (864 x 610mm)
52 x 31 In. (1321 x 1321mm)
40 Lbs./Sq.Ft. (194 Kgs./Sq.m)
5' x 42"
®
HIGH GLOSS
3"
(76mm)
5-1/4"
(133mm)
C/L OF
DRAIN
OUTLET
EDGE OF
FLOOR
CUTOUT
3/4"
(19mm)
2"
(51mm)
23"
(584mm)
21"
(533mm)
110 Lbs. (50 Kg.)
611 Lbs. (278 Kg.)
12-1/2 In. (318mm)
27.8
45.4
Rev. 2/08