Da-Lite ViewShare Tensioned Advantage Electrol Retrofit Talimat Kitabı - Sayfa 5

Projeksiyon Perdesi Da-Lite ViewShare Tensioned Advantage Electrol Retrofit için çevrimiçi göz atın veya pdf Talimat Kitabı indirin. Da-Lite ViewShare Tensioned Advantage Electrol Retrofit 20 sayfaları.

Sayfayı Yazdır
Transfer of Existing Motor
1.
Once the old screen and roller assembly is out of the case,
remove the Phillips head screw securing the screen tensioning
cable to the roller on the motor end (Figure 9).
2. Remove motor from the old screen and roller assembly and set
aside (Figure 10).
NOTE: Try to avoid turning the rubber collar on the motor as you
are pulling the motor out of the roller as this will change the limit
switch settings.
3. Remove the black L-bracket from pin end of roller (Figure 11).
4. Unscrew shipping brackets from slat and gently lay slat behind
roller (Figure 11).
Roller
Assembly
Motor
Figure 10
Screen
Tensioning
Cable
Phillips Head
Screw
Figure 9
Shipping
Bracket
Black
L-Bracket
Figure 11
5