Da-Lite ADVANTAGE DELUXE ELECTROL Spesifikasyon Verileri
Projektör Aksesuarları Da-Lite ADVANTAGE DELUXE ELECTROL için çevrimiçi göz atın veya pdf Spesifikasyon Verileri indirin. Da-Lite ADVANTAGE DELUXE ELECTROL 2 sayfaları. Automatic electric projection screen
Ayrıca Da-Lite ADVANTAGE DELUXE ELECTROL için: Şartname (2 sayfalar), Talimat Kitabı (12 sayfalar), Talimat Kitabı (12 sayfalar), Talimat Kitabı (12 sayfalar), Talimat Kitabı (9 sayfalar), Talimat Kitabı (8 sayfalar)
Sayfayı Yazdır
Advantage
®
Automatic Electric Projection Screen Model
SUGGESTED SPECIFICATIONS:
(H) x
(W). The Advantage® Deluxe Screen shall have
two motors, one to operate door and one to operate screen. Door motor
electrically operated 120 volt (60 Hz) not more than 1.2 amp, mounted inside
the roller, to be three wire with ground, quick reversal type, oiled for life, with
automatic thermal overload cutout, integral gears, capacitor and an electric
brake to prevent coasting. To have pre-set but adjustable limit switches to
automatically stop fabric door in the "down" position. The door will lift to the
closed position where a micro switch shall cut off the electrical current to the
door motor. Screen motor is electrically operated 120 volt (60 Hz) not more
than 2.4 amp, mounted inside the roller, to be three wire with ground quick
reversal type, oiled for life, with automatic thermal overload cutout, integral
gears, capacitor and an electric brake to prevent coasting. To have pre-set but
adjustable limit switches to automatically stop picture surface in the "up" and
"down" positions. The roller to be of rigid metal. Screen fabric to be flame
retardant and mildew resistant fiberglass with black masking borders standard.
Bottom of fabric shall be formed into a pocket holding a metal rod with plastic
Viewing Area (H x W)
In.
Cm
43" x 57"
109 x 145
50" x 67"
127 x 170
57" x 77"
145 x 196
60" x 80"
152 x 203
69" x 92"
175 x 234
87" x 116"
221 x 295
105" x 140"
267 x 356
120" x 160"
305 x 406
Viewing Area (H x W)
In.
Cm
45" x 80"
114 x 203
52" x 92"
132 x 234
54" x 96"
137 x 244
58" x 104"
147 x 264
65" x 116"
165 x 295
78" x 139"
198 x 353
90" x 160"
229 x 406
Viewing Area (H x W)
In.
Cm
50" x 80"
127 x 203
571⁄2" x 92"
146 x 234
60" x 96"
152 x 244
65" x 104"
165 x 264
69" x 110"
175 x 279
721⁄2" x 116"
184 x 295
87" x 139"
221 x 353
100" x 160"
254 x 406
Square Format Dimensions (Screens With ^ Have 2" Standard Black Drop at Top)
50" x 50"
60" x 60"
70" x 70"
84" x 84"
6' x 8'^
8' x 8'
7' x 9'^
9' x 9'^
8' x 10'^
10' x 10'^
9' x 12'^
12' x 12'
Deluxe Electrol
projection screen(s),
Video (NTSC 4:3) Format Dimensions (2" Standard Black Drop at Top)
Nominal Diagonal
In.
72"
84"
96"
100"
120"
150"
180"
200"
HDTV (16:9) Format Dimensions (2" Standard Black Drop at Top)
Nominal Diagonal
In.
92"
106"
110"
119"
133"
159"
184"
Wide (16:10) Format Dimensions (2" Standard Black Drop at Top)
Nominal Diagonal
In.
94"
109"
113"
123"
130"
137"
164"
189"
Viewing Area (H x W)
In.
Cm
127 x 127
152 x 152
178 x 178
213 x 213
183 x 244
244 x 244
213 x 274
274 x 274
244 x 305
305 x 305
274 x 366
366 x 366
®
caps. Case shall be a white powder coated aluminum extrusion. Bottom of
case to be self-trimming with a built-in flange around the bottom of the case.
A section of the bottom of the case shall be an aluminum door equipped with
concealed hinges so that it opens and closes automatically with the lowering
and raising of the picture surface. The balance of the bottom of the case shall
be a second hinged aluminum door with manual opening to provide access.
Junction box shall be internally integrated into the housing making it possible
to install the housing and wire to the building's electrical system during
construction. The junction box shall contain a quick connect connector that is
mounted in the housing for easy plug-in connection to the motorized fabric
and roller assembly. The motorized fabric and roller assembly to be installed in
the case at the factory or at a later time at the job site. To be complete with
integrated low voltage control unit and three position control switch with
cover plate. Suitable for use in environmental air space in accordance with
section 300-22 (c) of the National Electric Code, and sections 2-128, 12-010 (3)
and 12-100 of the Canadian Electrical Code, part 1, CSA C22.1. Screen to be
listed by Underwriters' Laboratories.
Overall Length of Case*
Cm
In.
183
72¼"
213
82¼"
244
96¼"
254
96¼"
305
108¼"
381
132¼"
457
156¼"
508
176¼"
Overall Length of Case*
Cm
In.
234
96¼"
269
108¼"
279
112¼"
302
120¼"
338
132¼"
404
156¼"
467
176¼"
Overall Length of Case*
Cm
In.
239
96¼"
277
108¼"
287
112¼"
312
120¼"
330
126¼"
348
132¼"
417
156¼"
480
176¼"
Overall Length of Case*
In.
Cm
62¼"
158
72¼"
184
82¼"
209
96¼"
244
108¼"
275
108¼"
275
120¼"
305
120¼"
305
132¼"
336
132¼"
336
156¼"
397
156¼"
397
SPECIFICATION DATA
Approx. Ship. Wt.
Cm
Lbs.
184
83
209
93
244
114
244
118
275
128
336
165
397
190
448
198
Approx. Ship. Wt.
Cm
Lbs.
244
122
275
137
285
141
305
153
336
165
397
190
448
198
Approx. Ship. Wt.
Cm
Lbs.
244
120
275
138
285
141
305
156
321
161
336
165
397
190
448
198
Approx. Ship. Wt.
Lbs.
Kg
71
32.2
81
36.7
104
47.2
115
52.2
128
58.1
131
58.4
136
61.7
149
67.6
165
74.8
176
79.8
190
86.2
200
90.7
Kg
37.6
42.2
51.7
53.5
58.1
74.8
86.2
89.8
Kg
55.3
57.6
64.0
69.4
74.8
86.2
89.8
Kg
54.4
62.6
64.0
70.7
73.0
74.8
86.2
89.8
*Case length does
not include flange