eKey Uno Hızlı Başlangıç Kılavuzu - Sayfa 3

Tarayıcı eKey Uno için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. eKey Uno 6 sayfaları. Fingerprint scanner, wireless
Ayrıca eKey Uno için: Hızlı Başlangıç Kılavuzu (12 sayfalar), Hızlı Başlangıç Kılavuzu (6 sayfalar)

Sayfayı Yazdır

Activate the Nuki Smart Lock

Follow the operating instructions for the Nuki Smart Lock and mount it

on the door lock on the inside of the door

Fully charge the ekey uno battery

Charging time max. 5 hours

Battery is charging

Battery is fully charged

You can only activate the system successfully with a fully charged battery.

Define the position for the ekey uno

Determine a suitable position outside for your ekey uno before you start

mounting it. Right next to the door, for example. It is IMPORTANT to note:

110 cm

*According to the BLE wireless connection standard, the typical range is 10 m. However, this can be

lower, depending on the installation situation and the type of door.

Attach the mounting plate - minimum height 110 cm

Glue variant*

An adhesive foil is already

attached to the mounting

plate. Remove the base foil

and adhere the mounting

Battery-operated variant

The device must be easy to reach with one's hand.

The installation height of at least 110 cm is

important for ergonomically correct operation and

must therefore be observed.

The ekey uno communicates wirelessly with the

door lock actuator. Both devices must therefore be

installed in close proximity* to one another.

plate.

CLICK

Screw variant