eKey Home Kullanım Talimatları Kılavuzu - Sayfa 15
Ağ Geçidi eKey Home için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. eKey Home 17 sayfaları.
Ayrıca eKey Home için: Kullanım Talimatları Kılavuzu (20 sayfalar)
Sayfayı YazdırUpdating the
software
14│en
Step
Action
5.
6.
No action
required.
The finger scanner has been reset to its default settings. You can now
recommission the system.
Via the control panel
Resetting to the default settings is only possible with the ekey home CP
mini 1
and is initiated via the control panel. This can only be undertaken
for the
ekey home CP micro 1
Step
Action
1.
2.
No action
required.
The control panel has been reset to its default settings. You can now
recommission the system.
See
Implementing the devices
We are working to constantly improve our products and add new
functionalities. Correspondingly, updates are made available for the finger
scanner and control panel software. More information about this can be
obtained from your dealer.
Error displays and troubleshooting
Display
Status LED
lights up red.
Status LED
lights up red.
If these suggestions fail to solve the problem, the system must be
returned to ekey biometric systems GmbH for repair. Please ship the
Description
in step 2.
Wait for 5 seconds.
-
at the factory.
Description
Press and hold the button
with the operating rod for
at least 4 seconds.
-
page 9.
Meaning
The finger was not
recognised
The finger scanner lights
up red immediately. No
fingerprints are stored.
Display
Status LED lights
up orange, the
function LEDs
flash green.
The upper status
LED flashes
green.
Display
Status LED
flashes red.
Status LED lights
up orange, the
function LEDs
flash green.
Remedy
Draw the finger over
the sensor again.
Store a minimum of
one fingerprint.