Canon Color imageCLASS MF8580Cdw Ayarlar Kılavuzu - Sayfa 6
Hepsi Bir Arada Yazıcı Canon Color imageCLASS MF8580Cdw için çevrimiçi göz atın veya pdf Ayarlar Kılavuzu indirin. Canon Color imageCLASS MF8580Cdw 20 sayfaları. Wireless lan
Ayrıca Canon Color imageCLASS MF8580Cdw için: Ayarlar Kılavuzu (25 sayfalar), Başlangıç Kılavuzu (37 sayfalar), Hızlı Kılavuz (4 sayfalar)
Sayfayı Yazdır
8
Enter the network key .
1 Enter the network key using the numeric keys .
2 Press [OK] .
9
Select <Yes>, and then press [OK] .
10
After the <Connected .> screen is displayed,
wait until the Wi-Fi indicator stops blinking and
turns on .
Wait approximately 2 minutes after the
connection.
IP address is set during this period of time .
When an error message appears:
Press [OK] to close the screen, check whether or not
the network key is correct, and then retry the settings .
If the access point cannot be detected even after
retrying, see the following .
e-Manual "When an Error Message Appears"
To set IP address manually:
e-Manual "Setting IP Addresses"
En
6
Checking That the Wireless LAN Setting
is Completed
1
Press
(Status Monitor) .
2
Select <Network Information>, and then press
[OK] .
3
Select <IPv4>, and then press [OK] .
4
Select <IP Address>, and then press [OK] .
5
Take note of the IP address .
6
Press
(Status Monitor) .
7
Start a Web browser from a computer, enter
http://<IP address of the machine>/
"
address field, and then press [Enter] on your
keyboard .
8
Check that the screen of the Remote UI is
displayed .
Connection is completed if the screen is displayed.
If the screen is not displayed correctly:
e-Manual "Common Problems"
in the
"