American Standard Colony 1583.470 Özellikler & Boyutlar - Sayfa 2
Sıcak Küvet American Standard Colony 1583.470 için çevrimiçi göz atın veya pdf Özellikler & Boyutlar indirin. American Standard Colony 1583.470 2 sayfaları. 5' x 32" whirlpool and bathing pool
Sayfayı Yazdır
305 mm
(12)
222 mm
(8-3/4)
19 mm
(3/4)
FINISHED
WALL
SEE FITTING
SPECS FOR
DIMENSIONS
229 mm
806 mm
(31-3/4)
CUTOUT IN FLOOR
403 mm
FOR DRAIN
(15-7/8)
C/L OF
60mm
SUPPLIES
(2-3/8)
C/L OF DRAIN
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
1651 & 1981mm
(65 & 78)
C/L OF
OVERFLOW
38 mm
(1-1/2)
70mm
(2-3/4)
502 mm
(19-3/4)
ROUGH
FLOOR
INTEGRAL
1-1/2 N.P.T.M.
SUPPORT
FEET
1-1/2 O.D.TAILPIECE
GENERAL SPECIFICATIONS FOR 2770 WHIRLPOOL
INSTALLED SIZE
59-7/8 x 31-3/4 x 19-3/4 In. (1521 x 806 x 502mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
MIN. OPERATING GAL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF
BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.
■
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL 3 WALL TILING BEAD. KIT AND APRON NO. 9260.018 OR 9360.018 AVAILABLE AND MUST BE ORDERED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.
© 2008 AS America Inc.
PROVIDE ACCESS TO PUMP FOR
SERVICING ON ALL INSTALLATIONS
1521 mm
(59-7/8)
OUTLINE OF CUTOUT
1483 mm x 768 mm
(58-3/8 X 30-1/4 )
(9)
PUMP
(2) AIR VALVES
(8) JETS
C/L OF
SHOWER ARM
C/L OF
VALVES
C/L OF
305 mm
SPOUT
LEVELING
(12)
STRINGER
102 mm
NOT FOR
(4)
SUPPORT
464 mm
(18-1/4)
THREADS
70 mm
(2-3/4)
117 mm
(4-5/8)
85 Lbs. (39 Kg.)
535 Lbs. (243 Kg.)
54 Gal. (204 L.)
49 Gal. (186 L.)
20 x 40 In. (508mm x 1016mm)
53-1/2 x 26 In. (1359mm x 699mm)
14 In. (356mm)
41 Lbs./Sq. Ft. (197 Kgs/Sq. m.)
1.25 HP, 9.9 AMPS, 120V.
WHIRLPOOL AND BATHING POOL
222 mm
(8-3/4)
19 mm
(3/4)
FINISHED
WALL
SEE FITTING
SPECS FOR
DIMENSIONS
ON/OFF
SWITCH
806 mm
(31-3/4)
403 mm
(15-7/8)
C/L OF
SUPPLIES
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
1651 & 1981mm
(65 & 78)
C/L OF
OVERFLOW
ROUGH
GENERAL SPECIFICATIONS FOR 2770 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
15.6
(PROJECTED AREA)
29.6
PTS.
CUBE (FT 3 )
H64
CADET™ 5' x 32"
1521 mm
(59-7/8)
305 mm
(12)
229 mm
(9)
CUTOUT IN FLOOR
FOR DRAIN
60mm
(2-3/8)
C/L OF DRAIN
305 mm
38 mm
(12)
(1-1/2)
102 mm
70mm
(4)
(2-3/4)
502 mm
(19-3/4)
FLOOR
1-1/2 N.P.T.M.
INTEGRAL
SUPPORT
THREADS
FEET
1-1/2 O.D.TAILPIECE
59-7/8 x 31-3/4 x 19-3/4 In.
(1521mm x 806 mm x 502mm)
512 Lbs. (233 Kg.)
20 x 40 In. (508mm x 1016mm)
53-1/2 x 26 In. (1359mm x 699mm)
39 Lbs./Sq. Ft. (189 Kgs/Sq. m.)
HIGH GLOSS
OUTLINE OF CUTOUT
1473 mm x 768 mm
(58 X 30-1/4 )
C/L OF
SHOWER ARM
C/L OF
VALVES
C/L OF
SPOUT
LEVELING STRINGER
NOT FOR SUPPORT
464 mm
(18-1/4)
70 mm
(2-3/4)
117 mm
(4-5/8)
62 Lbs. (28 Kg.)
54 Gal. (204 L.)
14 In. (356mm)
15.6
29.6
Revised 2/08