Canon FAXPHONE L170 Başlangıç Kılavuzu - Sayfa 6

Hepsi Bir Arada Yazıcı Canon FAXPHONE L170 için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Canon FAXPHONE L170 13 sayfaları. Faxphone l180 starter guide
Ayrıca Canon FAXPHONE L170 için: Teknik Bilgiler (2 sayfalar), Temel Kılavuz (8 sayfalar)

Sayfayı Yazdır
Canon FAXPHONE L170 Başlangıç Kılavuzu
Connect Telephone Cables and Install Handset

Connect Telephone Cables

Connect the supplied telephone line cord to the line jack (A) in the illustration and the wall jack.
Connect the handset cord to the handset jack (C) in the illustration.
Connect any external device to the external device jack (B) in the illustration if required.
3
Carefully push the pins into the plugs as far as they
will go.
9
C
B
A
4
Place the handset on the cradle.

Install Handset

1
A
Insert the plugs with pins (A) into the holes on the
handset cradle.
NOTE
Do not insert the pins all the way into the plugs at this
point.
NOTE
If using the handset or an external telephone, make sure
to set the fax receive mode to <FaxTel>, <Manual>, or
<DRPD>. For how to set the receive mode, see Chapter 7,
"Receiving Faxes," in the Basic Guide.
2
Insert the plugs (with the cradle) into the holes on
the machine.
10