EKHO EK-WL8-EXP/AU Hızlı Başlangıç Kılavuzu - Sayfa 6

Kontrol Ünitesi EKHO EK-WL8-EXP/AU için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. EKHO EK-WL8-EXP/AU 7 sayfaları. Wireless expander module
Ayrıca EKHO EK-WL8-EXP/AU için: Hızlı Başlangıç Kılavuzu (7 sayfalar)

Sayfayı Yazdır

EK-WL8-EXP/AU

WIRELESS EXPANDER MODULE

STFV.425551.030-AU-UM rev. 17

20.04.2020

Page 6 of 7

NOTE

You can check the RF quality in the place of installation in two ways: from the trans-

lator's menu or from Streletz-Wizard software.

By using "Maintenance/Device/Control" translator's menu it is possible to switch on

and off "RF link Quality" mode. Expander automatically exit this mode in 15 minutes.

ANALOG DATA

The expander provides the translator module with analog data about the air temper-

ature and RF link quality. This information can be viewed in the "Streletz-Wizard"

software.

Please refer to the software manual for full instructions on how to use the program

for system maintenance.

WARRANTY

All expanders are covered by a 5-year limited warranty. The warranty is voided by

mechanical or electrical damage caused by incorrect handling or usage. Expander

must be returned via an authorized supplier for repair or replacement along with full

information on the identified problem.

WARNINGS & LIMITATIONS

Devices use high quality electronic components and plastic materials that are highly

resistant to environmental deterioration. However, after 10 years continuous opera-

tion it is advisable to replace them to reduce the risk of reduced performance caused

by external factors. Ensure the devices are only used with compatible control panels.

Detection systems must be checked, serviced and maintained on a regular basis to

confirm correct operation.

Refer to and follow National Codes of Practice and other internationally recognized

fire engineering standards. Appropriate Risk Assessment should be carried out ini-

tially to determine correct design criteria and updated periodically.