Canon IMAGE RUNNER 5050 Kolay Kullanım Kılavuzu - Sayfa 36

Hepsi Bir Arada Yazıcı Canon IMAGE RUNNER 5050 için çevrimiçi göz atın veya pdf Kolay Kullanım Kılavuzu indirin. Canon IMAGE RUNNER 5050 44 sayfaları.

Sayfayı Yazdır

Additional Functions

TX Settings

TX Terminal ID

See the Sending and Facsimile Guide Chapter 9

Enables you to specify whether the Terminal ID information is printed at the top of documents

that you send through fax/I-fax.

Use Chunked Encoding with WebDAV Sending

See the Sending and Facsimile Guide Chapter 9

Enables you to set whether to send data in chunks of a known length when sending a ﬁ le of

(4/4)

unknown size with WebDAV. If this mode is used, transmission time is reduced, as it is not

necessary to calculated the ﬁ le size before sending it.

Confirm when Sending 2-Sided Orig. with Stamp

See the Sending and Facsimile Guide Chapter 9

This mode enables you to set whether to display a conﬁ rmation screen when stamping a

two-sided original that is to be sent (only if [2-Sided Single Pass] is set for the feeder scan

type).

Initialize TX Settings

See the Sending and Facsimile Guide Chapter 9

Enables you to restore all of the Send Settings to their defaults (initial settings).

*11

Displayed only if the optional Universal Send Kit is activated.

Common Settings: RX Settings

2-Sided Print (see p. 77)

See the Sending and Facsimile Guide Chapter 9

Enables you to print received documents on both sides of the paper you select. This enables

you to save paper.

Select Drawer

See the Sending and Facsimile Guide Chapter 9

Enables you to set how the machine prints documents when there is no paper matching the

size of the received document.

RX Settings

Receive Reduction

See the Sending and Facsimile Guide Chapter 9

Enables you to set the machine to automatically reduce received documents so that the

whole document is printed within the printable area of the paper.

Received Page Footer

See the Sending and Facsimile Guide Chapter 9

Enables you to set whether the machine prints the date received, day received, time

received, transaction number, and page number at the bottom of the received document.

(1/1)

2 On 1 Log

See the Sending and Facsimile Guide Chapter 9

Enables you to print two received documents of the same paper size onto a single sheet of

paper.

Fax Settings: User Settings

Unit Telephone #

See the Sending and Facsimile Guide Chapter 1

Enables you to store the machine's fax number. The number may also be displayed on the

touch panel display of the receiving party's machine, depending on their type of machine.

Tel Line Type

See the Sending and Facsimile Guide Chapter 1

Enables you to set the telephone line type.

User Settings

Volume Control

Sending and Facsimile Guide Chapter 9

Enables you to set the volume for the alarm and monitor tones that the machine emits during

a fax transmission.

Displayed only if the optional Super G3 FAX Board is installed.

(1/1)

Fax Settings: TX Settings

ECM TX

See the Sending and Facsimile Guide Chapter 9

Enables you to reduce the effect of system and line errors on documents that occur during

sending or receiving with another fax unit that supports ECM.

Pause Time

See the Sending and Facsimile Guide Chapter 9

Enables you to set the pause time when sending a fax.

TX Settings

Auto Redial

See the Sending and Facsimile Guide Chapter 9

Enables you to set the machine to automatically dial the recipient's fax number again if

the recipient cannot be dialed due to a busy line, or if a sending error occurs.

Check Dial Tone Before Sending

See the Sending an Facsimile Guide Chapter 9

Enables you to set whether to check for a dial tone before sending a fax.

(1/1)

Displayed only if the optional Super G3 FAX Board is installed.

Additional Functions