American Standard ACONT203AS42MA Kurulum ve Kullanım Kılavuzu - Sayfa 17
Termostat American Standard ACONT203AS42MA için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. American Standard ACONT203AS42MA 20 sayfaları.
Sayfayı Yazdır
6.1
User Menu
To customize thermostat settings, press the Menu button from the home screen. Use the
Next. Use Next and Back to navigate through menu items. Press
USER'S MENU #
(PRESS MENU BUT-
TON AND RELEASE)
Schedule Type: set as either 7-Day,
01
5-1-1 Day or Non Programmable
02
Defines periods per day
Early Start: starts heating or
E
cooling early so your programmed
03
temperature is reached by the
programmed time
Circulation Fan: sets the minimum %
Fn
of time for the fan to run (takes into
04
account the fan run time with heat/
cool equipment)
05
Fahrenheit or Celsius
Temperature Display
06
Adjustment: adjust the Room
Temperature)
Continuous Display Light: keep
dL
07
the backlight always on – "C" wire
required
Change Air Filter: set up a monthly
08
reminder
Auto-Changeover: thermostat
09
automatically switches between heat
and cool
6.2
Thermostat Operation
Set Current Time and Day
Note: Time icons will flash at initial power up or after a reset.
1.)
Press Menu
2.)
The time icon will be flashing. Press Next to advance and set
the time
3.)
Use
or
to set the correct time
4.)
Press Next and use
5.)
Press Exit when finished.
The default program is 5-1-1 Day, but can be setup as a 7-Day or
Non-Programmable thermostat (refer to the User Menu above).
•
Hold Temperature (bypassing the schedule) – With
the System set to Heat or Cool, momentarily press the
Hold/Run button. Hold will be displayed. Use
to adjust the temperature. The thermostat will hold the
room temperature at the selected setting until you press
Hold/Run again to start program operation (cancels
permanent Hold).
•
Program Override (Temporary Hold) – Press
until the desired temperature is displayed. The
thermostat will override the schedule until the next
programmed time period with a minimum override of 2
Pub. No.
11-HD19D1-1D-EN
DESCRIPTION
or
to set the correct day
09/2020
Part No. 37-7777006
American Standard 203 Programmable Thermostat
or
to change the setting.
DEFAULT SETTING
(FLASHING ICONS)
5
4
OFF
OFF
°F
0
OFF
OFF
OFF
hours. Then the thermostat will automatically revert to
the program.
•
Keypad Lockout – To prevent unwanted changes,
the buttons can be disabled. To turn this feature On,
press and hold
appears. To turn Off, press and hold
button for 3 seconds.
•
Circulation fan - makes sure the air is being re-
circulated by establishing a minimum run-time for the
fan regardless of whether the heating and cooling
equipment is running. When in use, "FAn" will appear on
the home screen (momentarily replacing the displayed
time). Choosing a setting of 30% will ensure the fan runs
at least 30% in a day, taking into account the time the
fan has run during any heating or cooling event.
or
or
or
buttons to highlight Settings and press
SETTINGS
(PRESS
7 – 7 Day
5 – 5-1-1 Day
0 – Non-Programmable
2 - P1, P2
4 - P1, P2, P3, P4
On – start early
OFF – start at program
period time
OFF, 10 to 100
°F – Fahrenheit
°C – Celsius
-5 to +5
On – always on
OFF – momentarily
1 to 12 – reminder time
(months)
OFF – no filter reminder
On - enable auto
OFF - disable auto
and the Menu button until the
and the Menu
OR
)
icon
17