Ekinex EK-GO1-DL Hızlı Başlangıç Kılavuzu

Dimmer Ekinex EK-GO1-DL için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Ekinex EK-GO1-DL 4 sayfaları. Dali 4-channel 230 vac dimmer

Sayfayı Yazdır

DALI 4-channel 230 Vac dimmer

Code: EK-GO1-DL

DALI bus dimmer with 230 Vac mains voltage power sup-

ply, it provides brightness control functions of LED and

halogen sources, dimmable using different types of com-

mands: KNX buttons connected to a DALI / KNX Gate-

way or other command devices compatible with the DALI

protocol.

Description

The ekinex DALI 4-channel 230 Vac dimmer EK-GO1-DL

allows brightness control of dimmable LED and halogen

sources by means of several types of button. It can be

connected by means of KNX (TP) pushbutton connected

to a DALI / KNX Gateway or by using other devices com-

patible with the DALI protocol. The device has an inte-

grated DALI bus communication module, is powered by

230 Vac mains voltage and does not require an auxiliary

power supply.

Functional characteristics

• Input: 230 Vac

• 4 independent outputs, 200W for each channel

• 230 Vac outputs for R-C loads

• DALI bus control

• Brightness adjustment

• "Trailing Edge" phase cut output for dimmable LED

lamps

• Minimum switch-on settable

• Soft on and off

• Memory function

Technical data

Inputs

• Nominal power supply voltage: 230 Vac

• Input voltage: 210 ... 240 Vac

• Network frequency: 50 Hz

• Full load efficiency:> 95%

• Power absorbed while awaiting command: <500 mW

Datasheet STEKGO1DL_EN

Outputs

• Output voltage: 210 ... 240 Vac

• Single channel output current: 0.8 A max

• Output current on 4 channels: 3.2 A max

• Minimum load power: 1 W per channel

• Rated power per channel: 200W

Dimming

• Dimming resolution: 16 bit

• Dimming mode - Phase-cut: Trailing edge

• Dimming range: 1-100%

Environmental conditions and other characteristics

• Operating temperature: -40 ° C ... + 40 ° C

• Storage temperature: - 40 ° C ... + 60 ° C

• Transport temperature: - 40 ° C ... + 60 ° C

• Relative humidity: 93% non-condensing

• Protection degree IP10 (device installed)

• Power & LEDs wiring: 0.2 ÷ 2.5 mm

• Power & LEDs stripping: 11.5 mm

• Housing in plastic material

• Safety class II

• Weight 200 g

• Modular device 8 MU (1 MU = 18 mm)

• Dimensions 143 x 91 x 62 mm (LxHxP)

Note: The dimming range depends on the techno-

logy of the bulb and / or LED module

Control, signaling and connection elements

The device is equipped with a spring terminal for connec-

ting the 230 Vac input mains power supply and the output

AC loads (1), a spring terminal for connecting the DALI

line (2) and 6 signaling LEDs (3).

AC Dimmer

EK-GO1-DL

Input: 230V ~ 50Hz

Output: 230V ~

Load: 4x 200W max

1) Spring terminal for 230 Vac input mains and output AC loads

2) Spring terminal for DALI line connection

3) Signaling LEDs

- 30 ÷ 12 AWG

DA DA

DALI IN

DALI OUT

BUS PWR

OUTPUT