Air Creation CLIPPER 582 SE Talimat ve Bakım El Kitabı - Sayfa 14
Hava Araçları Air Creation CLIPPER 582 SE için çevrimiçi göz atın veya pdf Talimat ve Bakım El Kitabı indirin. Air Creation CLIPPER 582 SE 18 sayfaları.
Sayfayı YazdırAfter any heavy landing :
• Check the front fork, remove and inspect the fork pivot and wheel axis.
• Check the seat frame and lower beam for distortion. Check seat seams.
• Check the upper beam and the front strut, the swivel joint (movement, cracks), the engine
support and the engine mounting rubber mounts.
• Check the rear wheel assembly, loosening of assembly devices and shock absorber
pressure.
• The structure of the wing must be completely inspected in our premises or by an approved
technical establishment after any heavy landing or even for slight damages.
WARNING :
Changing all NYLSTOP nuts after loosening is mandatory. Always secure such nuts using
particular LOCTITE glue.
Instruction and Maintenance Handbook GTE - CLIPPER
Tél. : 33 (0) 4 75 93 66 66 - Fax : 33 (0) 4 75 35 04 03 - Internet : www.aircreation.fr – [email protected]
AIR CREATION Aérodrome de Lanas - 07200 AUBENAS - France
EDITION : JUNE 2005
PAGE : 14