American Technologies Network Night Storm Kullanıcı Kılavuzu - Sayfa 6
Monoküler American Technologies Network Night Storm için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. American Technologies Network Night Storm 9 sayfaları.
clEANINg ThE EyEpIEcE
You may need to clean the eyepiece of the night Storm from time to time in order to guarantee
top performance. When you receive your night Storm you should check for dust on the
eyepiece of the unit.
First you will need to remove the eyepiece. to do that loosen the screw set that can be found
on the base. then unscrew the eyepiece counter-clockwise to remove it.
NOTE: You do not have to remove the screws set completely, they are very small and easy to
misplace.
CAUTION: Use only Photographic lens cleaning tissue on these surfaces. Be careful not to
scratch or smudge any of these surfaces. When using compressed air to blow dust away, make
sure to avoid inverting the can while spraying. This can cause frozen propellant to exit the can,
which can cause serious problems with the glass and phosphor screen.
wARNINgS ANd cAuTIoNS
• Always remember to turn the Night Storm off when it is not in use. If you do not plan on using
your device for a period of more than 10 days, you should remove the batteries.
• Keep lens cap/daylight filter on when not in use.
• Avoid contact with dust, steam, and gas.
• The Night Storm is not harmful to the user or the environment.
• Do not disassemble except to clean the front lens and the eyepiece: it will void your
warranty.
• Evaluate the scopes function by looking through it in a lit environment with the daylight filter
lens cap on. never use in daylight without the daylight filter lens cap on. Do not surpass ten
minutes of testing.
• Never point the Night Storm at a bright light source. If the scope shuts off automatically
after directing it at a bright light source, turn the unit off and wait 1 - 2 minutes before turning
the unit back on.
• Adverse atmospheric conditions such as fog, smog, or haze and a lack of ambient light
(moon or starlight) may diminish the effective viewing distance. All technical data for this unit
was compiled in a controlled environment.
• If you use the rubber eyecaps for a long period of time, you may suffer skin inflammation. If
you develop any symptoms, consult a doctor immediately.
TRoublEShooTINg
Q: Flashes, flickers or clicking occur while operating
S: If it occurs within the first five minutes of inserting new batteries, it is normal and the device
will resume normal operation soon thereafter. If it occurs for more than 10 minutes, contact for
service instructions.
Q: Dark spots on screen.
S: these are either cosmetic blemishes in the intensifier tube or dust particles.
Q: Screen becomes darker than at previous use.
S: Replace batteries. If problem persists, contact your dealer or other authorized service rep-
resentative for service instructions.
Q: Image not clear.
S: Adjust objective lens, and/or the eyepiece.
5