Astera Lightdrop AL3-series Kullanıcı Kılavuzu - Sayfa 9

Aydınlatma Ekipmanları Astera Lightdrop AL3-series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Astera Lightdrop AL3-series 11 sayfaları.

Sayfayı Yazdır

6 Troubleshooting

Faulty condition

LED no light when you switch on

Units behave incorrectly

Couldn't turn on the system

The indicator not blinking when charging DC plug or AC input not settled well or

Units will go out of battery after only 6

hours of operation.

Cause

Due to the vast number of settings, one

can not always predict behavior of the

units, if setup was already done earlier.

Due to the vast number of settings, one

can not always predict behavior of the

units, if setup was already done earlier.

Maybe the battery is run out.

battery is already full

The units last only 8 hours with COLD

WHITE, if the LED POWER is set to NOR-

MAL. For HIGH BRIGHTNESS the run

time is shorter than 8 hours.

Troubleshooting

Set the brightness to other value.

Do FACTORY RESET on units and/or re-

mote control.

Plug the AC input, and put the system

charge 1 hour more, then can turn ON

Discharge the battery a little or check

wether the DC has been plugged or

wether the AC input has any problem.

Adjust LED POWER and/or see manual

of the unit.