Astera AL7-L Kullanıcı Kılavuzu - Sayfa 8

Taşkın Işık Astera AL7-L için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Astera AL7-L 11 sayfaları. Wireless spot lamp

4.2 Advantages

Wireless design --- The AL7s are easy for installation due to its integrated battery

and RF receiver.

Smart programing --- The AL7s not only display complex color-changing programs

but also gives you the possibility to use your own customized colors for these pro-

grams when controlled by an ARC2 Remote Control. The AL7s can be used as stan-

dalone unit or grouped and paired with other Astera lamps and be controlled with an

ARC2 RF Remote Control.

Energy saving design --- Low working voltage, low power consumption and addi-

tional white LEDs helps to save up to 80% energy so it can reach a maximum opera-

tion time of up to 24 hours.

To power on the unit, hold the on/off button for 2-3 second.

To power off , hold the button again for 1 second, until the light turns off.

To choose basic colors or a rainbow effect, turn the unit on, then hold down the button and

keep the finger until the lamp turns into the blue blinking mode. Push the button several

times to cycle through the basic colors until the rainbow effect. When the desired color is

displayed, hold the button until the LEDs stop blinking and the lamp turns into normal oper-

ation.

To do a Factory Reset, turn the unit on. Then hold down the button and keep the finger

→

until: unit turns off

turns on blue blinking

turns off again

When the unit turns off for the second time, a factory reset was done.

While powered up, the indicator LED will show the battery charge state:

red – orange – green corresponding to the charge state

While charging, the LED will blink in green.