ASTi LectroFan Evo Kullanıcı El Kitabı - Sayfa 5

Kişisel Bakım Ürünleri ASTi LectroFan Evo için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. ASTi LectroFan Evo 15 sayfaları.

USING THE TIMER

LectroFan EVO plays continuously, but you can use the optional timer to gently

turn it off automatically. Tap the timer button to begin. You'll hear a short rising

tone, indicating that the timer has been set for one hour. Each time you tap it,

another hour will be added. When you hear a short falling tone, the maximum

of eight hours has been reached.

To cancel the timer, turn the EVO off, and then on again.

If you prefer that the LectroFan EVO not turn on immediately, you can disable

this feature:

1. Turn off the LectroFan EVO with the power button.

2. Press and hold the volume down button.

3. While you're still pressing the volume down button, press and release

the power button.

Restoring factory settings will set the LectroFan EVO to turn on automatically, and

reset the default sounds and volume level. To restore the factory settings, turn off

the LectroFan EVO then press and hold the power button until you hear a tone.

USING THE AUDIO OUTPUT CONNECTOR

Your LectroFan EVO has a 3.5mm analog audio jack which you can use to send

sound to a pillow speaker, portable speaker, headphones, or any audio device

which uses a 3.5mm plug. When you connect an external speaker, the built-in

speaker is turned off.

As with any audio source, be sure to keep the volume at a comfortable level

when using headphones or ear buds.